Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Silver 2U rackmount UPS with LCD screen and six rear outlets

APC

APC SMT1500RM2UC 1440 VA 1000 W 120V 6 Outlets Pure Sinewave UPS

SKU CH-VYHK-KG6TT MPN SMT1500RM2UC

Rackmount 2U pure-sinewave UPS delivers 1440 VA / 1000 W with automatic voltage regulation, SmartConnect cloud monitoring, and an LCD interface across six NEMA 5-15R outlets

  • International Version120V
  • Input Voltage Range82 - 144V
  • Input Frequency50/60 Hz +/- 3 Hz
  • Input ConnectionNEMA 5-15P
  • VA Rating1440 VA
  • Watts1000 Watts

Options SMT1500RM2UC

Zobrazit dalších 2 konfigurací

Přeškrtnuté varianty existují, ale zde nejsou skladem.

  • Pure sine wave output protects active PFC servers and sensitive electronics
  • SmartConnect cloud portal enables remote monitoring and firmware updates from any device
  • Automatic voltage regulation corrects fluctuations without using battery power
  • LCD display shows real-time load, runtime and battery status with multilingual menus
  • 1000 W capacity supports critical network gear with 7.2 min runtime at full load

Rackmount UPS for servers and network gear

The APC SMT1500RM2UC is a 2U rackmount uninterruptible power supply rated at 1440 VA and 1000 Watts. It delivers pure sine wave output on battery and includes automatic voltage regulation to correct fluctuations without using battery power. Six NEMA 5-15R outlets support servers, routers, switches and point-of-sale systems. A built-in LCD shows load, runtime and battery health.

Suits 120V racks needing pure sine wave

This unit fits administrators who require pure sine wave output for active PFC power supplies and want cloud-based status via SmartConnect. It is not for environments where the supply voltage falls outside the 82 to 144V input window. Buyers needing longer runtime at full load than 7.2 minutes or a non-rack form factor should look elsewhere.

Deciding spec: 1000 Watt pure sine wave capacity

The 1000 Watt continuous rating on a pure sine wave inverter determines whether your connected equipment stays online during an outage. If the total load of your rack gear exceeds this figure, the UPS will overload. Verify the combined wattage of every device you intend to protect against this limit before purchasing.

Přednosti

  • Pure sine wave output protects active PFC servers and sensitive electronics
  • SmartConnect cloud portal enables remote monitoring and firmware updates from any device
  • Automatic voltage regulation corrects fluctuations without using battery power
  • LCD display shows real-time load, runtime and battery status with multilingual menus
  • 1000 W capacity supports critical network gear with 7.2 min runtime at full load

Specifikace

BrandAPC
ModelSMT1500RM2UC
International Version120V
Input Voltage Range82 - 144V
Input Frequency50/60 Hz +/- 3 Hz
Input ConnectionNEMA 5-15P
VA Rating1440 VA
Watts1000 Watts
Output Voltage120V
Output Frequency50/60 Hz +/- 3 Hz
Outlets6
Outlet TypeNEMA 5-15R
Battery TypeSealed Lead Acid
Battery Run TimeAt Full load: 7.2 Minutes
At Half load: 25.8 Minutes
Battery Recharge Time3 Hour(s)
Battery ReplaceableAPCRBC133
Interface PortRJ-45, USB, Smart-Slot
ApprovalsCSA, CSA C22.2 No. 107.1, ENERGY STAR V1.0 (USA), FCC Part 15 Class B, ICES-003, UL 1778, RoHS Compliant
Surge Energy Rating680 Joules
FeaturesLCD Display Screen - Clear, Consistent, and detailed information in your choice of basic or advanced menus
Power Status - Operating mode, efficiency, load, input / output frequency, battery capacity, runtime and more
Configuration - Easily configure: language, power quality, alarms, delay and threshold settings
Test and Diagnostics - Initiate battery and runtime calibration tests
Control - UPS and outlet group settings
Quick Status Indicators - Online, on battery, fault, and replace battery LEDs for quick status identification
Escape, Return and navigation buttons - Intuitive navigat
Dimensions3.39" x 17.00" x 18.78"
Weight58.42 lbs.
Přepravní hmotnost32.66 kg
Rozměry balení599 × 594 × 239 mm

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How do I install the SMT1500RM2UC in a rack, and which connection step is often missed?

Mount the 2U chassis in a standard rack, plug the NEMA 5-15P input cord into a 120V branch circuit, then connect the USB or RJ-45 cable to your server so the management software can communicate with the UPS.

What maintenance will the SMT1500RM2UC need, and when should I order the replacement battery?

The sealed lead-acid battery is user-replaceable with part APCRBC133; the LCD shows a predictive month and year for replacement, and typical service life is three to five years depending on temperature and discharge cycles.

What limit appears first when the SMT1500RM2UC runs continuously at full load?

At 1000 W the internal battery provides 7.2 minutes of runtime, so battery capacity is the first constraint during a sustained outage.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.