Athena Power AP-U1ATX40P8 400W 1U server power supply
- Single
- 400W
Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.
Athena Power
A 1U 500 W server power supply with 20+4-pin ATX, EPS 8-pin and four SATA connectors for 1U chassis
The Athena Power AP-U1ATX50 is a 500W single-output 1U server power supply built for rack-mount chassis that require an EPS-style layout. It suits system integrators and IT teams deploying compact servers or workstations needing reliable DC delivery in a slim form factor.
Verify that your chassis accepts a 1U PSU measuring 1.59 by 8.66 by 3.94 inches and that the motherboard provides a 20+4 pin main header plus an EPS-12V 8 pin CPU header. Confirm the system can operate on 88 to 264 V input at 47 to 63 Hz and that the load profile stays within the rated +12V rail limits of 20 A, 20 A and 16 A respectively. Builds needing redundant supplies or higher total wattage should look elsewhere.
Dual 40 mm ball-bearing fans with automatic speed control move air from rear to front, helping keep internal temperatures in check while moderating acoustic output. The unit carries 80 PLUS Bronze certification and active PFC for efficient conversion across the full input range. Connectors include one 24-pin ATX, one EPS-12V 8 pin, one 4+4 pin CPU, four SATA, four Molex and one floppy, covering typical server drive and board layouts. A remote on/off function allows external power sequencing. MTBF is rated at 100,000 hours at full load and 25 °C.
| Brand | Athena Power |
|---|---|
| Model | AP-U1ATX50 |
| Single/Redundant | Single |
| Maximum Power | 500W |
| Main Connector | 20+4Pin |
| Output Current | +3.3@20A,+5V@20A,+12V1@20A, +12V2@20A, +12V3@16A, [email protected] , +5VSB@3A |
| Input Voltage | 88 - 264 V |
| Input Frequency Range | 47 - 63 Hz |
| MTBF | 100,000 Hours on Maximum Load at +25 degree C |
| Hold-up Time | 17 ms Minimum at Nominal Input Voltage |
| Features | Connectors: ATX Connector 24 (20+4) Pin x 1 EPS-12V 8 Pin x 1 P4-12V (4+4) Pin x 1 SATA 15 Pin x 4 Molex 4 Pin x 4 Floppy 4 Pin x 1 |
| Dimensions | 1.59" x 8.66" x 3.94" |
| Weight | 3.50 lbs. |
| Humidity | Operating: 0 degree C ~ +50 degree C on Full Load Storage & Shipping: -20 degree C ~ +80 degree C |
| Temperature | 0 degree C ~ +50 degree C on Full Load |
| Přepravní hmotnost | 1.50 kg |
| Rozměry balení | 281 × 189 × 102 mm |
Další verze tohoto modelu
Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.
The unit is non-modular; it comes with a fixed 24-pin ATX, one 8-pin EPS, one 4+4-pin CPU, four SATA, four Molex and one floppy connector already attached.
The three 12 V rails deliver 20 A, 20 A and 16 A respectively, while the 3.3 V and 5 V rails are each rated at 20 A; total output is capped at 500 W.
The 500 W maximum is specified at full load up to 50 °C ambient, with a minimum 17 ms hold-up time and 100,000-hour MTBF at 25 °C.
Také v této kategorii
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
Měna, ve které platíte, a měna, ve které se zobrazují ceny.
Odesláno z vaší peněženky u pokladny
Pouze pro zobrazení — katalog je veden v dolarech
Žádná měna neodpovídá.
Vyberte jazyk, ve kterém s vámi bude web komunikovat.
Žádný jazyk neodpovídá.
Poprvé tady?
Už účet máte?
Neexistuje žádná automatická obnova hesla: tento obchod neposílá žádné e-maily, takže neexistuje jednorázový odkaz, o který by bylo možné požádat. Nechte adresu uvedenou u účtu, vyřídíme ji ručně.
Žádost zaznamenána
Do vaší schránky nic nedorazí — tento obchod neposílá žádné e-maily. Někdo se o to postará ručně.
Vzpomněli jste si?