Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black 80mm square case fan 20mm thick with 3-pin connector

Athena Power

Athena Power FANC-8020BW3H 80mm 20mm case fan

SKU CH-171G-6KQT2

An 80 mm case fan with 20 mm thickness, ball bearing, 30–35 CFM airflow at 3000–3499 RPM and 25–30 dBA noise via a 3-pin connector

  • Fan Counts1 Fan
  • Fan ControllerNo Controller
  • TypeCase Fan
  • CompatibilityCase
  • Fan Size80mm
  • Fan Thickness20mm
  • Ball bearing for longer life at 3000–3499 RPM
  • 25–30 dBA keeps noise low at 30–35 CFM
  • 3-pin power connector fits standard motherboard headers
  • 80 mm × 20 mm frame suits compact chassis
  • CE and UL certified for safety compliance

80 mm case fan for compact builds

The Athena Power FANC-8020BW3H is an 80 mm square case fan designed for industrial PC chassis and small-form-factor cases. Its 20 mm thickness fits standard mounting points without protruding. The three-pin power connector supplies speed reporting to the motherboard. Ball bearings support continuous operation in demanding environments.

Three-pin connector limits voltage control

A three-pin header allows the motherboard to monitor RPM but cannot regulate voltage the way a four-pin PWM header does. Speed therefore stays near the 3000 to 3499 RPM range unless the board reduces voltage on the pin. Airflow reaches 30 to 35 CFM at that speed with a noise level of 25 to 30 dBA. Builders who need finer low-speed tuning should verify their header type.

Ball bearing and black plastic frame

The ball bearing design reduces friction compared with sleeve alternatives, extending service life in high-temperature enclosures. A black plastic frame and blades keep weight low while resisting vibration. CE and UL certification confirms compliance with safety standards. No LED lighting is included, suiting professional or server installations where visual distraction is unwanted.

Přednosti

  • Ball bearing for longer life at 3000–3499 RPM
  • 25–30 dBA keeps noise low at 30–35 CFM
  • 3-pin power connector fits standard motherboard headers
  • 80 mm × 20 mm frame suits compact chassis
  • CE and UL certified for safety compliance

Specifikace

BrandAthena Power
ModelFANC-8020BW3H
Fan Counts1 Fan
Fan ControllerNo Controller
TypeCase Fan
CompatibilityCase
Fan Size80mm
Fan Thickness20mm
Bearing TypeBall
RPM3000-3499 RPM
Air Flow30-35 CFM
Noise Level25 - 30 dBA
Power Connector3 Pin
ColorBlack
LEDNo
Dimensions80x80x20mm

Otázky k tomuto produktu

Should I pick the 80mm 20mm thick model or a thinner 80mm fan?

The 20mm thickness moves 30-35 CFM at 25-30 dBA; a thinner 80mm fan typically delivers less airflow at similar noise, so choose this when the chassis has the clearance.

What does the 3000-3499 RPM range mean for actual cooling inside my case?

At that speed the fan pushes 30-35 CFM through an 80mm frame, giving strong spot cooling for drive cages or VRM heatsinks while staying at 25-30 dBA.

How does the 3-pin connector limit speed control compared to PWM?

The 3-pin header allows voltage-based regulation only; the motherboard can vary voltage to change RPM within the 3000-3499 range but cannot send a PWM duty-cycle signal.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.