Axiom
Axiom SSDEV20LB1T9-AX enterprise SSD 1.92 TB 2.5" Sata 600
A 1.92 TB hot-swap enterprise SSD with a 2.5 inch Sata 600 interface delivering 510 MB/s read and 475 MB/s write speeds
- 92 TB capacity supports large enterprise workloads
- 510 MB/s read speed accelerates data access
- 475 MB/s write speed sustains heavy write operations
- SATA 600 interface integrates with existing servers
- Hot-swap 2.5" form factor enables drive replacement without downtime
Axiom 1.92 TB SATA enterprise SSD
The Axiom SSDEV20LB1T9-AX is a 1.92 TB solid-state drive built for enterprise servers and storage arrays. It delivers sequential reads up to 510 MB/s and writes up to 475 MB/s over a SATA 600 interface. The drive targets IT teams needing reliable capacity for mixed read-write workloads.
Hot-swap 2.5 inch form factor with RoHS compliance
A standard 2.5 inch chassis allows direct insertion into hot-swap bays without powering down the system. The SATA connector handles both data and power through the backplane, simplifying cable management. RoHS certification confirms restricted hazardous substances are absent from the assembly.
Verify SATA 6Gb/s backplane
Confirm the server or enclosure provides a SATA 600 backplane to achieve the rated transfer rates. Ensure the hot-swap tray accepts a 2.5 inch drive height without adapters. Check that the RAID controller or HBA supports the drive capacity and presents it correctly to the operating system.
Přednosti
- 92 TB capacity supports large enterprise workloads
- 510 MB/s read speed accelerates data access
- 475 MB/s write speed sustains heavy write operations
- SATA 600 interface integrates with existing servers
- Hot-swap 2.5" form factor enables drive replacement without downtime
Specifikace
| Brand | Axiom |
|---|---|
| Přepravní hmotnost | 0.45 kg |
| Rozměry balení | 25 × 25 × 25 mm |
Otázky k tomuto produktu
What does the SATA 600 interface cap the drive at in practice?
The SATA 600 interface limits this SSD to a maximum read transfer rate of 510 MB/s and a maximum write transfer rate of 475 MB/s.
What physical slot does the 2.5 inch hot-swap form factor need?
It fits a standard 2.5 inch hot-swap drive bay in servers or storage arrays that accept SATA drives.
How is this enterprise SSD installed, and what step is often missed?
Slide the drive into the hot-swap bay until the connector seats firmly; the step often missed is ensuring the drive clicks fully into the latch so the server recognises it.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
