Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Spool of 1.75 mm silk PLA filament in shiny red and black coextrusion

BFKK

BFKK Silk PLA Shiny Red Black 2 Colors in 1 Coextrusion 3D Filament 1.75mm 1KG

SKU CH-ET54-8BR7D

Coextruded silk PLA filament delivers two shiny colours in one spool for pearlescent, multi-colour prints without polishing

  • Silk-like finish without polishing thanks to pearlescent surface
  • Dual-colour coextrusion prints front and back in different hues
  • Low odour, bubble-free extrusion feeds smoothly without jamming
  • 75 mm diameter tolerance ensures consistent feeding on most FDM printers
  • 25 colour combinations available for varied creative projects

Dual-Color Silk PLA for FDM Printers

This BFKK filament combines shiny red and black in a single 1.75 mm strand through coextrusion. It targets makers who want two-tone prints without pausing to swap spools or running a multi-material upgrade. The silk finish gives a pearlescent surface straight off the build plate.

Check Nozzle and Spool Handling

Verify your printer accepts 1.75 mm filament and can run a 0.4 mm or larger nozzle; the supplier notes this size improves quality. Keep the free end seated in the spool holes after every print to preserve the 100 % tangle-free state it ships in.

Coextrusion Removes Post-Processing Steps

Because the colour change is built into the filament, you do not need to paint, dye or pause for a filament swap to get two colours on one model. The low-odour, bubble-free formulation also reduces the chance of jams or warping during long dual-colour jobs.

Přednosti

  • Silk-like finish without polishing thanks to pearlescent surface
  • Dual-colour coextrusion prints front and back in different hues
  • Low odour, bubble-free extrusion feeds smoothly without jamming
  • 75 mm diameter tolerance ensures consistent feeding on most FDM printers
  • 25 colour combinations available for varied creative projects

Specifikace

Pro tento produkt zatím nejsou zveřejněny žádné specifikace.

Otázky k tomuto produktu

What comes in the box and does the filament need any extra accessories before printing?

The box contains one 1 kg spool of 1.75 mm dual-colour Silk PLA. The manufacturer recommends a 0.4 mm or larger nozzle for best results, and advises securing the filament end in the spool holes after each print to keep it tangle-free.

How do I choose between the available colour combinations?

The supplier offers 25 different two-colour pairings in this Silk PLA range; pick the red-black spool if you want a shiny red front and black back on the same print, or select another of the 25 combinations to match your design.

What does the 1.75 mm diameter tolerance mean for everyday printing?

The tight 1.75 mm tolerance ensures consistent feeding and smooth extrusion on most FDM printers and 3D pens, reducing jams and warping while delivering a silky, pearlescent surface without polishing.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.