Brute Networks
Brute Networks 8GB DDR4-3200 PC4-25600 1Rx8 1.2V Non-ECC UDIMM AB120718
8GB DDR4-3200 UDIMM with 1Rx8 layout and 1.2 V operation for Dell-compatible servers
- Capacity8GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 3200 (PC4 25600)
- Voltage1.20V
- ECCYes
- Buffered/RegisteredUnbuffered
- 8GB capacity expands server memory headroom
- DDR4-3200 speed delivers 25600 MT/s bandwidth
- 2V operation reduces power draw per module
- 1Rx8 single-rank layout simplifies population rules
- Dell AB120718 equivalence ensures drop-in compatibility
Dell Compatible 8GB DDR4-3200 UDIMM
This Brute Networks module is an 8GB PC4-25600 DDR4-3200 UDIMM built to Dell part number AB120718. It runs at 1.2V with a 1Rx8 rank configuration on a 288-pin interface. The memory uses major brand chips from Samsung, SK Hynix, or Micron. It is designed for server upgrades requiring Dell-qualified compatibility.
Suits servers needing non-ECC unbuffered DDR4
This module fits systems that accept 8GB non-ECC unbuffered DDR4-3200 UDIMMs at 1.2V. Builders requiring registered or load-reduced DIMMs should look elsewhere. Servers that mandate ECC error correction cannot use this stick. Buyers needing capacities above 8GB per slot must choose a different density.
288-pin DDR4-3200 non-ECC unbuffered
The decisive specification is the 288-pin DDR4-3200 non-ECC unbuffered form factor at 1.2V. Only motherboards supporting this exact combination will accept the module. Verify the server manual lists 1Rx8 non-ECC UDIMM support before ordering.
Přednosti
- 8GB capacity expands server memory headroom
- DDR4-3200 speed delivers 25600 MT/s bandwidth
- 2V operation reduces power draw per module
- 1Rx8 single-rank layout simplifies population rules
- Dell AB120718 equivalence ensures drop-in compatibility
Specifikace
| Brand | Dell |
|---|---|
| Capacity | 8GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 3200 (PC4 25600) |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Chipset | Major Brand Chipset |
Otázky k tomuto produktu
Will this 1.20 V DDR4-3200 UDIMM run alongside existing 1.2 V DDR4 modules already installed in my Dell server?
The module operates at the standard 1.20 V DDR4 voltage, matching the electrical requirements of other 1.2 V DDR4 UDIMMs, so it will function alongside them at the speed supported by the memory controller.
How can I confirm the 1Rx8 288-pin module is detected and running at PC4-25600 after installation?
Check the system BIOS or a utility such as CPU-Z; it should report 8 GB capacity, 1Rx8 organisation, 288-pin DDR4 form factor and a maximum speed of 3200 MT/s (PC4-25600).
Does the box include only the memory stick or are any extra brackets or cables supplied?
Only the 8 GB 288-pin UDIMM is included; no brackets, cables or additional accessories are provided.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.



