Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Two black DDR5 DIMM sticks with gold contacts and silver heat spreaders

Computer Memory Solutions

Computer Memory Solutions 2x16GB DDR5 4400MHz CL40 1.1V 2Rx8 DIMM kit

SKU CH-3QNX-76K44

DDR5 4400 CL40 1.1 V 2Rx8 dual-channel kit with 288-pin unbuffered DIMMs

  • Capacity16GB
  • SpeedDDR5 4400 (PC5 35200)
  • CAS Latency40
  • Timing40-40-40-96
  • Voltage1.1V
  • ECCNo
  • 2×16 GB DDR5 kit doubles system memory capacity
  • 4400 MHz DDR5 speed raises data throughput for demanding workloads
  • CL40 40-40-40-96 timings deliver responsive latency at rated frequency
  • 1 V operation reduces power draw compared to higher-voltage modules
  • 288-pin unbuffered non-ECC DIMMs fit standard desktop DDR5 slots

2x16 GB DDR5-4400 kit for system upgrades

This Computer Memory Solutions kit contains two 16 GB DDR5 DIMMs rated at 4400 MHz with CL40 timings. The modules are unbuffered, non-ECC and operate at 1.1 V. They use a 288-pin form factor and 2Rx8 organisation. The kit is built with major-brand chipsets and carries a limited lifetime warranty against manufacturing defects.

Ideal for matching pairs in compatible platforms

The kit suits builders who want a matched pair to maximise performance on a platform that supports DDR5-4400 operation. It is not for systems that require ECC or registered memory. It is also not for platforms limited to earlier DDR generations or lower voltage requirements. Mixing with slower modules will cause all memory to run at the lowest common speed.

DDR5-4400 CL40 at 1.1 V decides fit

The decisive specification is the DDR5-4400 speed with CL40 latency at 1.1 V. The motherboard and processor must support this exact data rate and voltage for the kit to run as specified. If the platform caps memory at a lower speed or requires a different voltage, the modules will down-clock or may not operate.

Přednosti

  • 2×16 GB DDR5 kit doubles system memory capacity
  • 4400 MHz DDR5 speed raises data throughput for demanding workloads
  • CL40 40-40-40-96 timings deliver responsive latency at rated frequency
  • 1 V operation reduces power draw compared to higher-voltage modules
  • 288-pin unbuffered non-ECC DIMMs fit standard desktop DDR5 slots

Specifikace

Part NumberCM2048644400DIMM
Capacity16GB
SpeedDDR5 4400 (PC5 35200)
CAS Latency40
Timing40-40-40-96
Voltage1.1V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset

Otázky k tomuto produktu

Will the 288-pin DIMM modules fit my motherboard slots?

Yes, each 16 GB module uses the standard 288-pin DDR5 DIMM form factor, so it installs in any desktop board with DDR5 slots.

Do I need to enable anything in BIOS for the 4400 MHz speed, and what mistake should I avoid?

Enable the XMP or EXPO profile after seating both sticks; the common error is leaving the board at default speeds so the kit runs slower than 4400 MHz.

If a module fails years from now, what replacement does the manufacturer offer?

Computer Memory Solutions provides a limited lifetime exchange or repair against manufacturing defects, so a faulty stick can be returned for a replacement unit.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.