Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green circuit board with black memory chips and gold edge connector

Computer Memory Solutions

Computer Memory Solutions 4GB DDR3 1333 CL9 DIMM 1.5V HP Pro 6300

SKU CH-0QVX-0Q5Q3

A 4 GB DDR3-1333 CL9 DIMM rated at 1.5 V, validated for HP Pro 6300 and Pro 4300 desktops

  • Capacity64MB
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Timing9-9-9
  • Voltage1.5V
  • 4 GB capacity expands system memory for HP Pro 6300
  • DDR3 1333 MHz speed matches the platform memory bus
  • CL9 9-9-9 timing delivers standard latency operation
  • 5 V unbuffered non-ECC DIMM fits the 240-pin desktop slots
  • Single 4 GB module in a 1-piece kit for easy upgrade

4GB DDR3 1333 DIMM for HP Pro 6300

This 4 GB DDR3-1333 module is built for HP Pro 6300 MT and SFF systems. It uses a 240-pin unbuffered non-ECC design rated at CL9 and 1.5 V. The single stick adds capacity to compatible business desktops without requiring configuration changes.

Upgrading from 2GB or filling an empty slot

The Pro 6300 platform supports up to 32 GB across four sockets running at 1333 MHz. Adding this module helps when the current installation is 2 GB or when a free slot is available. A 64-bit operating system is needed to address memory above 4 GB.

Steady throughput under continuous workloads

The module operates at standard JEDEC voltage and timings without a heat spreader. Under sustained use it maintains the rated 1333 MHz speed within the system's thermal limits. Stability is preserved during extended sessions typical of office and light productivity tasks.

Přednosti

  • 4 GB capacity expands system memory for HP Pro 6300
  • DDR3 1333 MHz speed matches the platform memory bus
  • CL9 9-9-9 timing delivers standard latency operation
  • 5 V unbuffered non-ECC DIMM fits the 240-pin desktop slots
  • Single 4 GB module in a 1-piece kit for easy upgrade

Specifikace

BrandComputer Memory Solutions
ModelCM5126410600DIMM
Capacity64MB
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Timing9-9-9
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHp/Compaq Business Pro 6300 Mt/Sff Minitower
Package Content1 Memory RAM Stick

Otázky k tomuto produktu

Will the 240-pin DDR3 DIMM fit the four memory slots in my HP Pro 6300 MT/SFF?

Yes. The module is a standard 240-pin DDR3 DIMM and the Pro 6300 MT/SFF has four DDR3 slots that accept this form factor.

Do I need to install the stick in a specific slot or pair it with another module?

No. The kit is a single 4 GB stick; it can be placed in any empty slot and does not require pairing for operation.

Is there a heat spreader that could degrade or need cleaning over time?

The module has no heat spreader, so there is no spreader to clean or replace during its service life.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.