Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Two green circuit boards with gold edge connectors and black memory chips

Computer Memory Solutions

Computer Memory Solutions CM10246410600DIMM 16GB (2x8GB) DDR3 1333 memory upgrade

SKU CH-4BF2-DZ5RG

A 16 GB DDR3 1333 dual-channel kit built for HP Pro 6300 and 4300 desktops

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Timing9-9-9
  • Voltage1.5V
  • 16 GB dual-channel kit boosts multitasking with two 8 GB modules
  • DDR3 1333 MHz CL9 timing matches HP Pro 6300 spec
  • 5 V unbuffered non-ECC DIMMs install without BIOS changes
  • 240-pin form factor fits the four native memory slots
  • Lifetime warranty from CMS backs long-term reliability

HP Pro 6300 16GB DDR3 kit

This 16GB kit contains two 8GB unbuffered DDR3 DIMMs rated at 1333 MHz with CL9 timings. It is built for HP Business Pro 6300 MT, SFF and Minitower systems and also matches the listed Pro 4300 SFF part numbers. The modules run at 1.5V and use major-brand chips without heat spreaders.

Desktop upgraders with four DDR3 slots

The kit suits owners of the compatible HP models who want to populate two of the four available slots and reach 16GB total capacity. It is not for systems that require ECC or registered memory, nor for boards limited to lower densities or different pin counts. Buyers needing 32GB must add another matching pair.

DDR3 1333 CL9 1.5V specification

The decisive figure is the DDR3 1333 (PC3 10600) speed with CL9 9-9-9 timing at 1.5V. Your motherboard must accept unbuffered non-ECC 240-pin DIMMs at this exact rate; otherwise the modules will not operate as intended.

Přednosti

  • 16 GB dual-channel kit boosts multitasking with two 8 GB modules
  • DDR3 1333 MHz CL9 timing matches HP Pro 6300 spec
  • 5 V unbuffered non-ECC DIMMs install without BIOS changes
  • 240-pin form factor fits the four native memory slots
  • Lifetime warranty from CMS backs long-term reliability

Specifikace

BrandComputer Memory Solutions
ModelCM10246410600DIMM
Capacity16GB (2 x 8GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Timing9-9-9
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHp/Compaq Business Pro 6300 Mt/Sff Minitower
Package Content2 Memory RAM Sticks

Otázky k tomuto produktu

What speed does the DDR3 1333 (PC3 10600) interface actually run at in the HP Pro 6300?

The memory runs at 1333 MHz because the chipset caps it at that frequency.

Will these 240-pin DIMMs fit the HP Pro 6300 SFF and MT minitower models?

Yes, the 240-pin DDR3 DIMMs match the four DIMM sockets in both the SFF and MT chassis.

Which slot order should I use when installing the two 8 GB sticks?

Populate the lowest-numbered sockets first, typically the two black slots, to ensure dual-channel operation.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.