Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Two green DDR3 DIMMs with black chips no heat spreader

Computer Memory Solutions

Computer Memory Solutions CM5127210600ECCR2R4H 8GB (2x4GB) DDR3 1333 ECC Registered

SKU CH-PN36-E2TMC

Server-only ECC registered DDR3-1333 kit with two 4 GB modules for compatible systems

  • Capacity8GB (2 x 4GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Timing9-9-9
  • Voltage1.5V
  • ECC protection prevents data corruption in servers
  • Registered design stabilises heavy memory loads
  • 1333 MHz DDR3 speed matches PC3-10600 spec
  • 2 x 4 GB kit simplifies dual-channel setup
  • 240-pin DIMM fits standard server slots

Server-Ready ECC Registered Kit

This 8 GB kit contains two 4 GB DDR3 modules built for registered ECC server platforms. Each stick uses a 240-pin DIMM form factor and runs at 1333 MHz with CL9 timing. The memory is validated for PC3-10600 registered operation and carries a lifetime warranty from the manufacturer.

Registered DIMM Build Requirements

Registered ECC modules require a motherboard and chipset that support registered signalling and ECC correction; they will not function in standard desktop boards. The kit frees non-ECC slots for other uses but demands a server-class memory controller to initialise correctly. No heat spreader is fitted, so airflow in the chassis must handle the bare DRAM.

8 GB Capacity For Light Workloads

Two ranks of 2Rx4 chips deliver 8 GB total, suitable for entry virtualisation hosts, file servers or test environments. The 1.5 V operation keeps power draw modest while the CL9 latency provides predictable access times. Workloads needing larger datasets or higher bandwidth will exceed this capacity and require additional DIMM slots or higher-density modules.

Přednosti

  • ECC protection prevents data corruption in servers
  • Registered design stabilises heavy memory loads
  • 1333 MHz DDR3 speed matches PC3-10600 spec
  • 2 x 4 GB kit simplifies dual-channel setup
  • 240-pin DIMM fits standard server slots

Specifikace

BrandComputer Memory Solutions
ModelCM5127210600ECCR2R4H
Capacity8GB (2 x 4GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Timing9-9-9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible System10600 ECC Registered
Package Content2 Memory RAM Sticks

Otázky k tomuto produktu

Will the 1.5 V DDR3-1333 registered DIMMs throttle under sustained server workloads?

Registered ECC modules at CL9 9-9-9 timing run at the rated 1333 MHz without downclocking as long as the server’s memory controller supports PC3-10600.

How much heat and power do the 2Rx4 sticks generate during 24/7 operation?

Standard 1.5 V DDR3 registered DIMMs draw nominal power for the density; no heat spreader is fitted, so airflow across the 240-pin slots handles cooling.

Which server platforms accept this 240-pin ECC registered kit?

Any server mainboard qualified for PC3-10600R ECC registered DDR3-1333 memory; the kit is not compatible with desktop boards.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.