Corsair ML140 PRO LED CO-9050048-WW 140mm Blue PWM case fan
- 1 Fan
- No Controller
Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.
Corsair
140 mm magnetic-levitation PWM fan runs 400–2000 RPM for 20–97 CFM airflow at 16–37 dBA with red LED lighting
LED Red
This 140 mm case fan uses magnetic-levitation bearings and a custom rotor to balance static pressure with airflow. A single four-pin PWM connector allows motherboard speed control from 400 to 2,000 RPM. Red LEDs provide illumination while the fan moves 20 to 97 CFM at 16 to 37 dBA. The 25 mm thick frame fits standard mounting points.
The wide speed range suits systems that run silent at idle and ramp up under load, while the magnetic bearing reduces wear for long-term reliability. Users who require a bundled fan controller or multi-colour lighting should look at other models, as this unit includes neither a controller nor RGB LEDs. Builders with tight clearances under 25 mm will need a slimmer alternative.
Under continuous load the fan can maintain its upper RPM limit, delivering 97 CFM while noise settles at the rated 37 dBA. Magnetic levitation eliminates physical contact, so bearing noise does not increase over time and performance remains consistent during extended sessions. The PWM curve lets the motherboard hold a steady speed rather than cycling, keeping temperatures stable without sudden acoustic spikes.
| Brand | Corsair |
|---|---|
| Series | ML140 PRO LED |
| Model | CO-9050047-WW |
| Fan Counts | 1 Fan |
| Fan Controller | No Controller |
| Type | Case Fan |
| Fan Size | 140mm |
| Fan Thickness | 25mm |
| Bearing Type | Magnetic Levitation |
| RPM | 400 - 2,000 RPM |
| Air Flow | 20 – 97 CFM |
| Noise Level | 16 – 37 dBA |
| Power Connector | 4 Pin |
| LED | Red |
| Features | Magnetic Bearing: harnesses magnetic levitation technology to provide lower noise, higher performance, and a longer lifespan Custom Rotor Design: delivers the perfect balance between high static pressure and high airflow, operating flawlessly in the most challenging environments Extensive PWM Control Range: A 1,600 RPM PWM control range gives you total control between silence and absolute performance Color Customization: Replaceable corners mounted to anti-vibration rubber dampers allow you to match your fans with the rest of your build (Available separately in Red, White, and Blue) |
| Dimensions | 140mm x 140mm x 25mm |
| Package Contents | ML140 PRO LED, 140mm Premium Magnetic Levitation PWM Fan Fan mounting screws |
| Přepravní hmotnost | 0.32 kg |
| Rozměry balení | 178 × 150 × 36 mm |
Další verze tohoto modelu
Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.
Yes, it uses a 4-pin power connector for PWM speed control between 400 and 2000 RPM.
The fan measures 140mm x 140mm x 25mm, matching standard 140mm case or radiator mounts.
At minimum speed the noise level is 16 dBA and airflow is 20 CFM; at maximum it reaches 37 dBA and 97 CFM.
Také v této kategorii
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
Měna, ve které platíte, a měna, ve které se zobrazují ceny.
Odesláno z vaší peněženky u pokladny
Pouze pro zobrazení — katalog je veden v dolarech
Žádná měna neodpovídá.
Vyberte jazyk, ve kterém s vámi bude web komunikovat.
Poprvé tady?
Už účet máte?
Neexistuje žádná automatická obnova hesla: tento obchod neposílá žádné e-maily, takže neexistuje jednorázový odkaz, o který by bylo možné požádat. Nechte adresu uvedenou u účtu, vyřídíme ji ručně.
Žádost zaznamenána
Do vaší schránky nic nedorazí — tento obchod neposílá žádné e-maily. Někdo se o to postará ručně.
Vzpomněli jste si?