Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Compact rectangular USB DAC in matte black with angled edges, micro USB, optical and .13 inch jacks visible

Creative Labs

Creative Labs Sound BlasterX G6 70SB177000000 USB sound card 7.1 32-bit 384 KHz

SKU CH-W444-AE6DS MPN 70SB177000000

External USB DAC delivers 7.1 surround sound at 32-bit 384 KHz with a discrete headphone amplifier for PC and consoles

  • Part70SB177000000
  • Audio ChipsetSB-Axx1
  • Channels7.1
  • Sample Rate384 KHz
  • Digital Audio32-bit
  • SPDIF In1 x 0.13" Line In/mini TOSLINK In Combo Jack
  • Hi-res 32-bit 384 KHz DAC delivers studio-grade detail
  • Xamp bi-amp headphone amplifier drives 16 Ohm to 600 Ohm headphones
  • Dolby Digital 7.1 virtual surround sharpens in-game audio cues
  • Sound Blaster Connect software adds bass boost and vocal clarity
  • Compact external design with optical in and out for console and PC

Creative Sound BlasterX G6 USB DAC

The Creative Sound BlasterX G6 is a 7.1-channel external USB sound card that delivers 32-bit 384 KHz playback and 130dB dynamic range. It connects to PC, Mac, PS5, Xbox and Nintendo Switch through a single micro USB port. The built-in Xamp discrete headphone bi-amplifier drives loads from 16 to 600 ohms with a 1-ohm output impedance.

Build integration and connectivity

The device requires one USB 2.0 or 3.0 port and draws power from the bus. It adds a 0.13-inch combo jack for optical S/PDIF input and output, a separate 0.13-inch microphone input and a 0.13-inch headphone output. The compact 0.94 by 2.76 by 4.37-inch enclosure sits on a desk without needing an external power supply or internal case space.

Upgrade context and when to choose it

The G6 replaces basic motherboard audio or earlier USB DACs that lack discrete headphone amplification and 32-bit 384 KHz support. The jump is worthwhile when you need Dolby Digital decoding, 7.1 virtual surround, Scout Mode and game-voice balancing controlled through Sound Blaster Connect software. It is not for users who require multi-channel analogue outputs or internal PCIe installation.

Přednosti

  • Hi-res 32-bit 384 KHz DAC delivers studio-grade detail
  • Xamp bi-amp headphone amplifier drives 16 Ohm to 600 Ohm headphones
  • Dolby Digital 7.1 virtual surround sharpens in-game audio cues
  • Sound Blaster Connect software adds bass boost and vocal clarity
  • Compact external design with optical in and out for console and PC

Specifikace

BrandCreative
SeriesBlasterX
ModelG6
Part70SB177000000
Audio ChipsetSB-Axx1
Channels7.1
Sample Rate384 KHz
Digital Audio32-bit
SPDIF In1 x 0.13" Line In/mini TOSLINK In Combo Jack
SPDIF Out1 x 0.13" Line Out/mini TOSLINK Out Combo Jack
MIC In1 x 0.13" Ext. Mic In Jack
Other Ports1 x 0.13" Headphone / Headset Jack
1 x micro USB port for PC / Mac
InterfaceUSB
Operating Systems SupportedMicrosoft Windows 10 32 / 64 bit, Windows 8.1 / 8.0 32 / 64 bit, Windows 7 32 / 64 bit
Mac OS X v10.8 and above
PS4 Firmware Ver 5.0 or later
Xbox OS Ver 10.0 or later
Nintendo Switch, Switch OS 5.0 or later
System RequirementsWindows OS
Intel Core i3 or AMD equivalent processor
Intel, AMD or 100% compatible motherboard
1 GB RAM
> 600 MB of free hard disk space
USB 2.0 / USB 3.0 port
Mac OS
1 GB RAM
USB 2.0 / USB 3.0 port
PS4
Available USB port
Available Optical Out port (for Dolby Digital decoding)
Xbox One
Available Optical Out port (for Dolby Digital decoding)
External USB Power (not included)
Voice communications not supported
Nintendo Switch
Available 3.5 mm headphone port
Available USB port (in docking mode)
External USB Power (use with 3.5 mm headphone connection, not included)
Voice communications
Features130dB DNR, 32-bit 384 KHz DAC
Play 32-bit 384 KHz PCM and DoP audio streams with true authenticity and accuracy. Mismatch shaping technology eliminates distortion and streams audio with the highest level of detail and fidelity.
Support for Hi-Res Audio Formats
High-resolution 32-bit 384 KHz PCM and DoP audio formats ensure that music is delivered with true authenticity and accuracy.
Xamp Discrete Headphone Amplifier
Custom-designed headphone amplifier features discrete components in a bi-amp design. Each audio channel is individually amplified in an authentic, unaltered lossless mode
Dimensions0.94" x 2.76" x 4.37"
Weight0.32 lb.
Package ContentsSound BlasterX G6
1 x Optical Cable
1 x MicroUSB Cable
Quick Start Leaflet
Warranty Leaflets
Přepravní hmotnost0.39 kg
Rozměry balení168 × 157 × 46 mm

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What is the maximum sample rate the Sound BlasterX G6 supports for sustained high-resolution playback?

The DAC handles 32-bit 384 KHz PCM and DoP streams with mismatch shaping technology that eliminates distortion during continuous use.

How much power does the Xamp headphone amplifier draw and does it generate noticeable heat during all-day sessions?

The discrete bi-amp design runs from the micro USB 2.0/3.0 port with an ultra-low 1O output impedance, driving 16O to 600O loads without external power or active cooling.

Which connection must the host provide for the G6 to function on PC, PS5 or Switch?

A USB 2.0 or USB 3.0 port is required; the package includes a micro USB cable and an optical cable for digital I/O.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.