Crucial
Crucial CT2000P310SSD801 2TB M.2 2280 PCIe 4.0 NVMe internal SSD
2TB M.2 2280 NVMe drive with PCIe 4.0 x4 interface delivers up to 7100 MBps read and 6000 MBps write speeds using 3D NAND, rated for 440 TBW
- Device TypeInternal Solid State Drive (SSD)
- Form FactorM.2 2280
- Capacity2TB
- Memory Components3D NAND
- InterfacePCI-Express 4.0 x4
- ProtocolNVMe
- Fast boot and load times with up to 7100 MBps sequential read
- Sustained write performance up to 6000 MBps for large file transfers
- 440 TBW endurance rating supports heavy daily workloads
- 3D NAND technology delivers reliable high-capacity storage in 2TB
- Compact M.2 2280 form factor fits standard motherboard slots
Crucial P310 2TB PCIe 4.0 NVMe SSD
The Crucial P310 is a 2TB internal solid-state drive built in the M.2 2280 form factor. It connects through a PCI-Express 4.0 x4 interface using the NVMe protocol. 3D NAND flash memory provides the storage medium for this drive. Sequential reads reach up to 7100 MBps and writes up to 6000 MBps.
Who this suits and who should look elsewhere
This drive suits PC builders upgrading a laptop or desktop with an M.2 slot wired for PCIe 4.0 x4 who want 2TB capacity and 440TB endurance. Systems limited to PCIe 3.0 will not reach the stated 7100 MBps read ceiling. Builds requiring a pre-fitted heatsink should consider other models.
The spec that decides fit
The PCI-Express 4.0 x4 interface is the single specification that decides compatibility. Your motherboard or laptop must expose an M.2 2280 keyed for NVMe with four lanes of Gen 4 bandwidth to deliver the rated 7100 MBps read and 6000 MBps write performance.
Přednosti
- Fast boot and load times with up to 7100 MBps sequential read
- Sustained write performance up to 6000 MBps for large file transfers
- 440 TBW endurance rating supports heavy daily workloads
- 3D NAND technology delivers reliable high-capacity storage in 2TB
- Compact M.2 2280 form factor fits standard motherboard slots
Specifikace
| Brand | Crucial |
|---|---|
| Series | P310 |
| Model | CT2000P310SSD801 |
| Device Type | Internal Solid State Drive (SSD) |
| Form Factor | M.2 2280 |
| Capacity | 2TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 4.0 x4 |
| Protocol | NVMe |
| Max Sequential Read | Up to 7100 MBps |
| Max Sequential Write | Up to 6000 MBps |
| Terabytes Written (TBW) | 440TB |
| HeatSink | without HeatSink |
| Height | 0.09'' |
| Width | 0.86'' |
| Depth | 3.15'' |
| Weight | 0.02 lbs. |
| Přepravní hmotnost | 0.02 kg |
| Rozměry balení | 140 × 95 × 18 mm |
Otázky k tomuto produktu
Will the M.2 2280 form factor fit my laptop's slot?
The drive uses the standard M.2 2280 size measuring 3.15 inches long and 0.86 inches wide, matching most modern laptop and desktop slots.
How do I install the CT2000P310SSD801 and what step is often missed?
Insert the drive at an angle into the PCIe 4.0 x4 M.2 slot, press down, and secure it with the motherboard screw; many forget to enable NVMe in the BIOS after physical installation.
When will the 2TB 3D NAND drive need replacement based on endurance?
The drive is rated for 440TB written; typical consumer workloads write far less per year, so the SSD should last many years before reaching that limit.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
