Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
DATO ARS330 1TB M.2 2230 NVMe SSD with silver aluminum heatsink

DATO

DATO ARS330 1TB M.2 2230 NVMe internal SSD with heatsink

SKU CH-W4J5-K43DX

A 1 TB M.2 2230 NVMe SSD with an aluminium heatsink, delivering up to 2500 MB/s read and 1700 MB/s write speeds for compact devices

  • Device TypeInternal Solid State Drive (SSD)
  • Used ForConsumer
  • Form FactorM.2 2230
  • Capacity1TB
  • InterfacePCI-Express 3.0 x4
  • ProtocolNVMe

Capacity 1TB

  • Aluminium heatsink keeps temperatures steady under load
  • PCIe Gen3 x4 NVMe delivers up to 2500 MB/s reads
  • Single-sided M.2 2230 fits tight device slots
  • Low power draw extends battery life on portables
  • High-reliability NAND protects stored data integrity

Compact 1TB M.2 2230 NVMe SSD

The DATO ARS330 is a 1TB internal solid-state drive built in the single-sided M.2 2230 form factor. It targets compact devices such as mini PCs, laptops, tablets and handheld gaming systems that accept 2230-length NVMe modules. An integrated aluminum heatsink ships pre-attached to assist thermal control during sustained workloads.

Thermals and power in daily use

The aluminum heatsink improves heat dissipation to help maintain stable performance during high-speed operation. The drive is described as offering low power consumption and quiet operation typical of solid-state storage with no moving parts. No active cooling or fan is included or required for normal use.

Deciding specification: PCIe Gen3 x4 speeds

Sequential reads reach up to 2500 MB/s and writes up to 1700 MB/s over the PCIe 3.0 x4 NVMe interface. These figures determine whether the drive meets the throughput needs of a specific compact system. Verify that the host device supports M.2 2230 NVMe before installation.

Přednosti

  • Aluminium heatsink keeps temperatures steady under load
  • PCIe Gen3 x4 NVMe delivers up to 2500 MB/s reads
  • Single-sided M.2 2230 fits tight device slots
  • Low power draw extends battery life on portables
  • High-reliability NAND protects stored data integrity

Specifikace

BrandDATO
SeriesARS330
ModelARS330-1TB
Part NumberARS330-1TB
Device TypeInternal Solid State Drive (SSD)
Used ForConsumer
Form FactorM.2 2230
Capacity1TB
InterfacePCI-Express 3.0 x4
ProtocolNVMe
ConnectorNVMe
Max Sequential ReadUp to 2500 MBps
Max Sequential WriteUp to 1700 MBps
FeaturesNVMe PCIe Gen3 x4 Interface
M.2 2230 Form Factor
Aluminum Heatsink
Single-Sided Design
Read Speed up to 2500MB/s
Write Speed up to 1700MB/s
Internal Solid State Drive
Low Power Consumption
High Reliability NAND Flash
5-Year Limited Warranty
M.2 2230 Only (Not 2242 / Not 2280)
Height3.0 cm
Width2.2 cm
Depth0.31 cm
Weight10 grams
Package ContentInternal Solid State Drive

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How do I install the ARS330 1TB M.2 2230 NVMe SSD and what step is commonly missed?

Insert the single-sided module into an M.2 2230 slot at a shallow angle, press it flat, and secure it with the retention screw; the step people miss is verifying the gold finger is fully seated before tightening the screw, as a partial connection can cause damage.

What maintenance or replacement will the ARS330 1TB M.2 2230 NVMe SSD need later?

No routine maintenance is required; the aluminium heatsink is passive and the NAND flash has no user-serviceable parts, so the only future action would be replacing the drive itself if capacity or endurance is exhausted.

What limit appears first on the ARS330 1TB M.2 2230 NVMe SSD during sustained heavy writes?

The aluminium heatsink manages thermals for the PCIe Gen3 x4 NVMe interface, so the first bound reached under prolonged load is the sequential write ceiling of 1700 MB/s rather than thermal throttling.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.