Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

DELL

DELL 3N9XX VRTX PCIe Pass-Through Mezzanine Adapter network card

SKU CH-MVQA-328SP

Pass-through mezzanine card connects Dell PowerEdge M520, M620 and M630 blades directly to VRTX chassis I/O modules at 1Gbps or 10Gbps

  • Speed1Gbps or 10Gbps pass-through
  • ConnectorsPass-through interface (connects internally to VRTX chassis
  • InterfaceMezzanine PCIe (internal blade slot)
  • FeaturesDesigned for Dell PowerEdge M520 (and other VRTX blades) Ena
  • Package Contents1x Dell 3N9XX Pass-Through Mezzanine Card
  • ClassServer Network Adapter
  • Direct PCIe pass-through to external switches
  • Supports 1Gbps or 10Gbps pass-through speeds
  • Compatible with PowerEdge M520, M620, M630 blades
  • Low-latency design with no internal switching logic
  • Low-profile mezzanine card for VRTX chassis

Dell VRTX Pass-Through Mezzanine Adapter

The Dell 3N9XX is a pass-through mezzanine network adapter built for Dell PowerEdge M520, M620 and M630 blade servers installed in a VRTX chassis. It provides a direct PCIe link from the blade to the chassis I/O module without any internal switching or logic. This design suits administrators who need deterministic low-latency paths to external physical switches.

Compatibility check before ordering

Verify that the target blade is a supported M520, M620 or M630 and that it resides inside a Dell PowerEdge VRTX shared infrastructure chassis. Confirm an available internal mezzanine slot on the blade and ensure the chassis I/O module provides the external switch connectivity your topology requires. The adapter will not function in non-VRTX enclosures or unsupported blade models.

What the bundle changes

The package contains only the 3N9XX pass-through mezzanine card itself. No cables, transceivers, drivers or management utilities are included, so you must source compatible SFP+ or other optics and any required firmware from the switch vendor or Dell support channels. Installation is a simple blade-slot insertion, but external cabling and switch configuration remain separate tasks.

Přednosti

  • Direct PCIe pass-through to external switches
  • Supports 1Gbps or 10Gbps pass-through speeds
  • Compatible with PowerEdge M520, M620, M630 blades
  • Low-latency design with no internal switching logic
  • Low-profile mezzanine card for VRTX chassis

Specifikace

BrandDell
Model3N9XX
Part Number3N9XX+AA
Speed1Gbps or 10Gbps pass-through
ConnectorsPass-through interface (connects internally to VRTX chassis I/O module)
InterfaceMezzanine PCIe (internal blade slot)
FeaturesDesigned for Dell PowerEdge M520 (and other VRTX blades)
Enables direct PCIe pass-through to VRTX I/O modules
No switching or logic – direct external switch integration
Low power, low latency
Package Contents1x Dell 3N9XX Pass-Through Mezzanine Card
ClassServer Network Adapter

Otázky k tomuto produktu

Does the Dell 3N9XX mezzanine card ship with any cables or transceivers, or must those be purchased separately?

The package contains only the pass-through mezzanine card; external I/O modules and any required cabling are supplied with the VRTX chassis, not with this adapter.

Which blade models are supported by the 3N9XX pass-through adapter?

The adapter is designed for PowerEdge M520, M620 and M630 blades installed in a VRTX chassis.

What does the 1Gbps or 10Gbps pass-through rating mean for actual throughput on the blade?

The card provides a direct PCIe lane to the chassis I/O module, so line-rate throughput matches whatever external switch module is installed in the VRTX.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.