DELL
DELL 400-AMSD 8TB 3.5" SAS 12Gb/s 7.2K Hot Swap internal hard drive
An 8 TB 3.5" SAS 12 Gb/s 7.2 K hot-swap hard drive for high-capacity nearline storage
- PackagingBare Drive
- InterfaceSAS 3Gb/s
- Capacity1.8TB
- RPM10000 RPM
- Average Latency3Gb/s
- Form Factor2.5"
- 8TB capacity stores large datasets
- 12Gb/s SAS interface enables fast transfers
- 2K RPM balances throughput and efficiency
- Hot-swap tray allows drive replacement without downtime
- 5-inch form factor fits standard server bays
Dell 8TB Nearline SAS Drive
The Dell 400-AMSD is a new 8TB 3.5-inch nearline SAS hard drive spinning at 7.2K RPM with a 12Gb/s transfer rate. It ships as a bare drive with a hot-swap tray for tool-less bay installation in compatible Dell servers and storage arrays.
Suits capacity-focused arrays
This drive suits administrators expanding nearline storage pools where sequential throughput and hot-swap serviceability matter. It is not for workloads demanding 10,000 RPM access speeds or 2.5-inch form-factor bays.
12Gb/s SAS interface
The single specification that decides fit is the 12Gb/s SAS interface; the host backplane and controller must support this exact signalling rate for the drive to operate.
Přednosti
- 8TB capacity stores large datasets
- 12Gb/s SAS interface enables fast transfers
- 2K RPM balances throughput and efficiency
- Hot-swap tray allows drive replacement without downtime
- 5-inch form factor fits standard server bays
Specifikace
| Brand | Dell |
|---|---|
| Model | 400-AJUP |
| Packaging | Bare Drive |
| Interface | SAS 3Gb/s |
| Capacity | 1.8TB |
| RPM | 10000 RPM |
| Average Latency | 3Gb/s |
| Form Factor | 2.5" |
Otázky k tomuto produktu
Will the 3.5" hot-swap tray slide into a standard SAS backplane?
The drive uses a 3.5" hot-swap tray designed for SAS backplanes that accept 12 Gb/s Nearline SAS drives.
Does the hot-swap tray need any screws or tools to seat the drive?
The tray is tool-less; align the SAS connector and push until the latch clicks, a step often missed if the lever is not fully closed.
How often should the 7.2K Nearline SAS drive be checked for SMART errors?
Schedule a SMART scan monthly; Nearline SAS drives at 7.2K RPM typically show reallocated-sector counts before mechanical wear appears.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.



