DELL PowerEdge M640 blade server 2x Xeon 8160 2.1GHz 24-core 128GB DDR4 2x 1.92TB SSD
- Blade
- Blade
Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.
DELL
Half-height blade server with dual 18-core Xeon Gold 6154 CPUs, 128 GB DDR4 ECC memory and two 1.92 TB SATA SSDs on a PERC H330 controller
SSD (Installed) 2 x 1.92TB SATA SSD
This half-height PowerEdge M640 blade fits into MX or M1000e chassis and ships with two Intel Xeon Gold 6154 processors running at 3.0 GHz with 3.7 GHz turbo. Eighteen cores per CPU give 36 cores total, backed by 128 GB of DDR4-2666 registered ECC memory across eight slots. The PERC H330 controller manages two 1.92 TB SATA SSDs in a choice of RAID 0, 1, 5, 10 or 50. A Broadcom 57810S-K dual-port 10 Gb daughter card and iDRAC9 Enterprise provide networking and remote management out of the box.
The blade form factor restricts you to two 2.5-inch drive bays and a single mezzanine slot for the included 10 Gb card; no further PCIe cards can be added inside the blade itself. Memory tops out at 1.5 TB across 16 DDR4 slots, so the current 128 GB leaves room to grow but cannot exceed that ceiling. The H330 controller supports SATA and SAS but does not present NVMe to the operating system, and the Matrox G200 graphics core is limited to 8 MB video memory for basic console output only.
This server requires a compatible PowerEdge MX or M1000e enclosure with available half-height slots and sufficient power and cooling budget for dual 18-core CPUs. Confirm the chassis firmware supports the M640 and that the 57810S-K mezzanine matches your fabric modules. No operating system, bezel or rails are included, so plan for OS licensing and physical mounting separately.
| Brand | DELL |
|---|---|
| Series | PowerEdge M640 |
| Type | Blade |
| Rack Height | Blade |
| CPU Type | Intel Xeon |
| CPU Speed | 3.00 GHz |
| CPU Socket | LGA 3647 |
| Number of CPU Cores | 18-Core Processor |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 128GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 2TB |
| Number of Memory Slots | 16 |
| Storage Controller | Dell Perc H330 Controller |
| HDD Interface | SATA/SAS |
| SSD (Installed) | 2 x 1.92TB SATA SSD |
| Raid Level | RAID 0/1/5/10/50 |
| GPU Type | Matrox G200 |
| Video Memory | 8MB |
| Ethernet Controller | Dell Broadcom 57810S-K 10Gb Dual Port Blade Network Daughter Card |
| Management Port | RJ 45 |
| Operating System | No |
Další verze tohoto modelu
Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.
The server ships with 128 GB of DDR4 2666 MHz ECC across 8 of the 16 slots, leaving room to scale to 2 TB if your workloads need it.
Each of the two 18-core Xeon Gold 6154 CPUs runs at 3.0 GHz and can boost to 3.7 GHz, giving 36 cores that accelerate bursty tasks while sustaining high throughput.
The H330 supports SATA 6 Gb/s and SAS 12 Gb/s, so the 1.92 TB SATA SSDs operate at their full 6 Gb/s link speed with RAID 0, 1, 5, 10 or 50 available.
Také v této kategorii
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
Měna, ve které platíte, a měna, ve které se zobrazují ceny.
Odesláno z vaší peněženky u pokladny
Pouze pro zobrazení — katalog je veden v dolarech
Žádná měna neodpovídá.
Vyberte jazyk, ve kterém s vámi bude web komunikovat.
Poprvé tady?
Už účet máte?
Neexistuje žádná automatická obnova hesla: tento obchod neposílá žádné e-maily, takže neexistuje jednorázový odkaz, o který by bylo možné požádat. Nechte adresu uvedenou u účtu, vyřídíme ji ručně.
Žádost zaznamenána
Do vaší schránky nic nedorazí — tento obchod neposílá žádné e-maily. Někdo se o to postará ručně.
Vzpomněli jste si?