DELL PowerEdge M640 Blade Server 2x Xeon 8160 2.1GHz 24C 512GB DDR4 S140 2x 2.5" 57810S-K iDRAC9 Enterprise
- Blade
- Blade
Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.
DELL
Half-height blade server with dual 24-core Xeon Platinum 8260 processors, 128GB DDR4, PERC H330 controller and two 1.92TB SATA SSDs
SSD (Installed) 2 x 1.92TB SATA SSD
The Dell PowerEdge M640 is a half-height blade server built for dense compute environments. It ships with two Intel Xeon Platinum 8260 processors running at 2.4 GHz with a 3.9 GHz turbo frequency. 128 GB of DDR4 2933 MHz registered ECC memory is installed across eight slots. Storage is handled by a PERC H330 controller with two 1.92 TB SATA SSDs configured in RAID 0, 1, 5, 10 or 50.
This blade fits organisations running virtualisation clusters, private clouds or high-performance computing grids that can populate a PowerEdge MX or M1000e chassis. It includes a Broadcom 57810S-K dual-port 10 Gb network daughter card and iDRAC9 Enterprise for remote management. Buyers without a compatible blade enclosure, or who need a tower or rack-mount server with integrated rails and bezel, should look at a different form factor.
The M640 supports a maximum of two processors, so the installed pair of 24-core Xeon Platinum 8260 CPUs already reaches the blade's ceiling. Memory can grow to 1.5 TB using the 16 available DDR4 slots, and the storage controller accepts SATA or SAS drives including NVMe options. If a workload demands more than two sockets per node, this platform cannot satisfy it.
| Brand | DELL |
|---|---|
| Series | PowerEdge M640 |
| Type | Blade |
| Rack Height | Blade |
| CPU Type | Intel Xeon |
| CPU Speed | 2.40 GHz |
| CPU Socket | LGA 3647 |
| Number of CPU Cores | 24-Core Processor |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 128GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 2TB |
| Number of Memory Slots | 16 |
| Storage Controller | Dell Perc H330 Controller |
| HDD Interface | SATA/SAS |
| SSD (Installed) | 2 x 1.92TB SATA SSD |
| Raid Level | RAID 0/1/5/10/50 |
| GPU Type | Matrox G200 |
| Video Memory | 8MB |
| Ethernet Controller | Dell Broadcom 57810S-K 10Gb Dual Port Blade Network Daughter Card |
| Management Port | RJ 45 |
| Operating System | No |
Další verze tohoto modelu
Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.
Each Xeon Platinum 8260 has a base frequency of 2.4 GHz and a turbo ceiling of 3.9 GHz; under continuous load the processors will settle at their rated TDP before any other component reaches its limit.
The M640 relies on the M1000e or MX chassis fans for cooling; installed CPUs, 128 GB DDR4, H330 controller and two 1.92 TB SSDs all draw power inside the blade, so chassis fan speed and resulting noise scale with total system load.
The blade requires a Dell PowerEdge M1000e or MX series enclosure and uses the factory-installed Broadcom 57810S-K 10 Gb dual-port daughter card for network connectivity.
Také v této kategorii
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
Měna, ve které platíte, a měna, ve které se zobrazují ceny.
Odesláno z vaší peněženky u pokladny
Pouze pro zobrazení — katalog je veden v dolarech
Žádná měna neodpovídá.
Vyberte jazyk, ve kterém s vámi bude web komunikovat.
Poprvé tady?
Už účet máte?
Neexistuje žádná automatická obnova hesla: tento obchod neposílá žádné e-maily, takže neexistuje jednorázový odkaz, o který by bylo možné požádat. Nechte adresu uvedenou u účtu, vyřídíme ji ručně.
Žádost zaznamenána
Do vaší schránky nic nedorazí — tento obchod neposílá žádné e-maily. Někdo se o to postará ručně.
Vzpomněli jste si?