Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Silver 2U rack server with front bezel, eight 2.5-inch drive bays and redundant power supplies

DELL

DELL PowerEdge R730 2U rack server 2× Xeon E5-2640 v3 2.6GHz 8-core 768GB DDR4 8× 400GB SSD H730

SKU CH-JWJ5-Q5CW1

A 2U rack server with dual 2.6 GHz 8-core Xeon processors, 768 GB DDR4 memory and eight 400 GB SATA SSDs on a PERC H730 controller

  • TypeRack
  • Rack Height2U
  • Redundant Hot-swap PowerYes
  • CPU TypeIntel Xeon
  • CPU Speed2.60 GHz
  • CPU SocketLGA 2011-3
  • Two Xeon E5-2640 v3 processors run at 2.6 GHz with 3.4 GHz turbo
  • 768 GB DDR4 ECC memory across 24 slots supports up to 1.5 TB
  • PERC H730 controller handles RAID 0, 1, 5, 6, 10, 50, 60
  • Eight 400 GB SATA SSDs provide fast storage in 2.5 inch bays
  • Dual 750 W platinum power supplies and iDRAC8 Enterprise ensure uptime

Dell PowerEdge R730 2U server

This Dell PowerEdge R730 is a 2U rack server built for midsize and large enterprise workloads. It ships with dual Intel Xeon E5-2640 v3 processors, each running at 2.60 GHz with 8 cores and 3.4 GHz turbo. The system includes 768 GB of DDR4 registered ECC memory across 24 slots and a PERC H730 storage controller with 1 GB cache. Eight 400 GB SATA SSDs provide high-speed storage in the eight 2.5-inch drive bays.

Suited for virtualisation and database clusters

The dual-socket design and large memory capacity suit virtual desktop infrastructure, database nodes and high-performance computing tasks. Redundant 750 W power supplies and iDRAC8 Enterprise remote management support continuous operation. Buyers who need a single-socket platform or more than eight drive bays should look at a different class of system.

PERC H730 RAID controller with 1 GB cache

The installed PERC H730 controller supports RAID 0, 1, 5, 6, 10, 50 and 60 plus pass-through mode. Its 1 GB battery-backed cache accelerates write performance and protects data during power loss. This controller decides whether the storage topology matches the application’s redundancy and throughput requirements.

Přednosti

  • Two Xeon E5-2640 v3 processors run at 2.6 GHz with 3.4 GHz turbo
  • 768 GB DDR4 ECC memory across 24 slots supports up to 1.5 TB
  • PERC H730 controller handles RAID 0, 1, 5, 6, 10, 50, 60
  • Eight 400 GB SATA SSDs provide fast storage in 2.5 inch bays
  • Dual 750 W platinum power supplies and iDRAC8 Enterprise ensure uptime

Specifikace

BrandDELL
SeriesPowerEdge R730
ModelR730
TypeRack
Rack Height2U
Redundant Hot-swap PowerYes
CPU TypeIntel Xeon
CPU Speed2.60 GHz
CPU SocketLGA 2011-3
Number of CPU Cores8-Core Processor
# of Processors Installed2
MAX Processors2
ChipsetIntel C610
Installed Memory Size768GB
Memory TypeDDR4
Max Memory Capacity1.5TB
Number of Memory Slots24
Storage ControllerDell Perc H730 1GB Controller
HDD InterfaceSATA
SSD (Installed)8 x 400GB SATA SSD
Raid LevelRAID 0/1/5/6/10/50/60
GPU TypeMatrox G200
Video Memory8MB
Ethernet ControllerDell Intel X520/I350 Quad Port 2x 1GbE 2x 10Gb SFP+ Network Daughter Card
LAN Ports4 x Ports
Expansion Slots1 x PCIe 3.0 x16 Slot, Single Riser Included (Riser 3)
Management PortRJ 45
Operating SystemNo
Features8 x 2.5" SATA/SAS Hot-Plug Drive Bays

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Does this server need any extra memory modules or storage drives to boot and run workloads?

No. The system ships with 768GB of DDR4 2133MHz registered ECC memory across 24 slots and eight 400GB SATA SSDs, so it is ready to operate immediately.

Will the PERC H730 controller recognise and manage older 6Gb/s SATA drives I might add to the empty bays?

Yes. The H730 supports 12Gb/s SAS and SATA, so legacy 6Gb/s SATA drives will be detected and can be configured in RAID 0, 1, 5, 6, 10, 50 or 60.

How can I confirm the dual Xeon E5-2640 v3 CPUs are reaching their 3.4GHz turbo frequency under load?

Use iDRAC 8 Enterprise or the system BIOS to monitor real-time CPU frequency; the dashboard will show each core scaling up to 3.4GHz when thermal headroom allows.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.