Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Silver 2U rack server with 24 front 2.5-inch drive bays and bezel

DELL

DELL PowerEdge R730xd 2U rack server 2× Xeon E5-2660 v4 2.0GHz 14-core 768GB DDR4 24× 400GB SSD

SKU CH-8BCX-FZ2KM

A 2U rack server with dual 14-core Xeon processors, 768GB DDR4 memory and 24 SATA SSDs for storage-intensive workloads

  • TypeRack
  • Rack Height2U
  • Redundant Hot-swap PowerYes
  • CPU TypeIntel Xeon
  • CPU Speed2.00 GHz
  • CPU SocketLGA 2011-3
  • Dual 14-core Xeon processors at 2.0 GHz with 3.2 GHz turbo for heavy compute
  • 768 GB DDR4 registered ECC memory across 24 slots supports large datasets
  • 24 × 400 GB SATA SSDs on PERC H730 controller with RAID 0/1/5/6/10/50/60
  • Quad-port networking with dual 1 GbE and dual 10 Gb SFP+ connections
  • iDRAC8 Enterprise remote management plus dual 750 W platinum power supplies for uptime

Dual Xeon E5-2660 v4 2U server

The Dell PowerEdge R730xd is a 2U rack system with two 14-core Intel Xeon E5-2660 v4 processors at 2.0 GHz and 768 GB of DDR4 ECC memory. It ships with a PERC H730 controller and 24 hot-swap 400 GB SATA SSDs in a 24-bay chassis. Dual 750 W platinum power supplies and iDRAC 8 Enterprise provide redundancy and remote management.

Suited for high-capacity SATA workloads.

This server fits buyers who need 24 hot-swap 2.5-inch SATA SSDs behind a single RAID controller with battery-backed cache. It is not for environments that require a pure SAS backplane or more than two processor sockets.

PERC H730 with 1 GB cache and battery

The installed PERC H730 1 GB controller supports RAID 0, 1, 5, 6, 10, 50 and 60 plus pass-through mode. The battery protects write-cache during power loss, making it the specification that decides if this chassis matches the buyer's data-protection requirements.

Přednosti

  • Dual 14-core Xeon processors at 2.0 GHz with 3.2 GHz turbo for heavy compute
  • 768 GB DDR4 registered ECC memory across 24 slots supports large datasets
  • 24 × 400 GB SATA SSDs on PERC H730 controller with RAID 0/1/5/6/10/50/60
  • Quad-port networking with dual 1 GbE and dual 10 Gb SFP+ connections
  • iDRAC8 Enterprise remote management plus dual 750 W platinum power supplies for uptime

Specifikace

BrandDELL
SeriesPowerEdge R730XD
ModelR730xd
TypeRack
Rack Height2U
Redundant Hot-swap PowerYes
CPU TypeIntel Xeon
CPU Speed2.00 GHz
CPU SocketLGA 2011-3
Number of CPU Cores14-Core Processor
# of Processors Installed2
MAX Processors2
ChipsetIntel C610
Installed Memory Size768GB
Memory TypeDDR4
Max Memory Capacity1.5TB
Number of Memory Slots24
Storage ControllerDell Perc H730 1GB Controller
HDD InterfaceSATA
SSD (Installed)24 x 400GB SATA SSD
Raid LevelRAID 0/1/5/6/10/50/60
GPU TypeMatrox G200
Video Memory8MB
Ethernet ControllerDell Intel X520/I350 Quad Port 2x 1GbE 2x 10Gb SFP+ Network Daughter Card
LAN Ports4 x Ports
Expansion Slots1 x PCIe 3.0 x16 Slot, Single Riser Included (Riser 3)
Management PortRJ 45
Operating SystemNo
Features24 x 2.5" SATA/SAS Hot-Plug Drive Bays

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What rack depth and rail clearance do I need to install the 2U R730xd with the included Ready Rails?

The server is a 2U rack-mount chassis that ships with Ready Rails; verify your cabinet provides at least 2U of vertical space and sufficient depth for the rail length before mounting.

Can I keep my existing SATA SSDs and connect them to the PERC H730 controller alongside the 24 installed 400GB drives?

Yes, the PERC H730 supports SATA and SAS interfaces, so additional SATA SSDs can be added to the remaining drive bays and configured in RAID 0, 1, 5, 6, 10, 50 or 60.

How do I confirm the iDRAC8 Enterprise remote management is reachable after initial cabling?

Connect the dedicated iDRAC network port, power on the server, then browse to the IP shown on the front-panel LCD or via DHCP lease; the login screen confirms the interface is active.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.