Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

Dynatron

Dynatron C2 60mm 2 Ball Bearing 2U CPU cooler

SKU CH-9TKZ-QJ7KR MPN C2

60 mm dual ball-bearing fan on an aluminium stacked-fin heatsink with direct-contact heat pipes, fitting 2U and taller Intel LGA 7529 servers

  • ColorSilver
  • TypeFan & Heatsinks
  • Fan Size60mm
  • Bearing Type2 Ball Bearing
  • RPMAt Duty Cycle 0~20%: 2300 +/- 200 RPM At Duty Cycle 50%: 540
  • Air FlowAt Duty Cycle 0~20%: 11.91 CFM At Duty Cycle 50%: 28.38 CFM
  • Low noise at idle with 25.8 dBA at 20 % duty
  • Strong airflow under load reaching 58.31 CFM at full speed
  • Dual ball bearing fan for longer service life
  • Direct-contact heat pipes on aluminium stacked-fin base
  • Fits 2U and taller server chassis at 67 mm height

LGA 7529 server cooler

The Dynatron C2 is an active air cooler built for Intel LGA 7529 sockets in 2U and taller chassis. It uses a 60mm dual ball-bearing fan mounted on an aluminium stacked-fin heatsink with heat pipes that contact the CPU directly. The unit weighs 630 g and measures 132.5 x 97.8 x 67 mm. Builders needing a lower profile or a different socket cannot use this model.

Thermals and acoustics at three duty cycles

At 0 to 20 percent duty the fan spins at 2300 RPM, moves 11.91 CFM and produces 25.8 dBA. At 50 percent duty it reaches 5400 RPM, 28.38 CFM and 44.4 dBA. At full duty it runs at 11000 RPM, delivers 58.31 CFM and 59.8 dBA. Static pressure rises from 1.48 mm-H2O through 7.54 mm-H2O to 28.8 mm-H2O across the same range. No LED lighting is fitted.

Mounting hardware included

The package supplies #8-32 mounting screws with a specified installation torque of 8 in-lb. This hardware secures the cooler to the LGA 7529 retention mechanism without additional brackets. No thermal compound, fan-speed software or extra accessories are mentioned in the manufacturer data.

Přednosti

  • Low noise at idle with 25.8 dBA at 20 % duty
  • Strong airflow under load reaching 58.31 CFM at full speed
  • Dual ball bearing fan for longer service life
  • Direct-contact heat pipes on aluminium stacked-fin base
  • Fits 2U and taller server chassis at 67 mm height

Specifikace

BrandDynatron
ModelC2
ColorSilver
TypeFan & Heatsinks
Fan Size60mm
Bearing Type2 Ball Bearing
RPMAt Duty Cycle 0~20%: 2300 +/- 200 RPM
At Duty Cycle 50%: 5400 +/- 10% RPM
At Duty Cycle 100%: 11000 +/- 10% RPM
Air FlowAt Duty Cycle 0~20%: 11.91 CFM
At Duty Cycle 50%: 28.38 CFM
At Duty Cycle 100%: 58.31 CFM
Noise LevelAt Duty Cycle 0~20%: 25.8 dBA
At Duty Cycle 50%: 44.4 dBA
At Duty Cycle 100%: 59.8 dBA
PressureAt Duty Cycle 0~20%: 1.48 mm-H2O
At Duty Cycle 50%: 7.54 mm-H2O
At Duty Cycle 100%: 28.8 mm-H2O
LEDNon-LED
Heatsink MaterialAluminum Stacked-fin with Heat Pipes directly contact CPU
Fan Dimensions60 x 60 x 25 mm
Weight630 g
Přepravní hmotnost0.79 kg
Rozměry balení152 × 127 × 102 mm

Otázky k tomuto produktu

How do I install the Dynatron C2 on an LGA 7529 socket and what torque should I use?

Mount the cooler using the #8-32 screws provided and tighten them to 8 in-lb of torque to ensure proper contact between the heat pipes and the CPU.

Will the 2 ball bearing fan need replacement and how long does it typically last?

The 2 ball bearing fan is rated for longer life than sleeve bearings and generally runs for years in 2U server environments before requiring replacement.

At what duty cycle does the C2 reach its maximum noise level of 59.8 dBA?

The cooler reaches 59.8 dBA at the 100% duty cycle, where the fan spins at 11000 RPM and delivers 58.31 CFM of airflow.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.