Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Horizontal rack PDU with twelve front outlets and LCD display

Eaton

Eaton EMIT01-10 Metered PDU 12-Outlet 1.92 kVA 120 V

SKU CH-3MN2-X0YKH MPN EMIT01-10

Metered power distribution unit with twelve NEMA 5-20 outlets and 1.92 kVA rating at 120 V AC

  • TypeConsumer Electronics
  • Input Voltage120 V AC
  • Output Voltage120 V AC
  • FeaturesPackage Contents: ePDU Metered EMIT01-10 12-Outlet PDU SPK02
  • Remote current monitoring per section via network
  • Local LCD display enables phase balancing and provisioning
  • ±1 % billing-grade metering accuracy
  • Hot-swap meter allows maintenance without downtime
  • Daisy-chain up to four units on one IP

Eaton Metered PDU 12-Outlet 1.92 kVA

This Eaton Metered PDU delivers 1.92 kVA of power distribution at 120 V AC through twelve NEMA 5-20R outlets in a horizontal form factor. It provides remote monitoring of current draw per section via network communication and features a local LCD pixel display for phase balancing and start-up provisioning. The unit supports daisy-chaining up to four PDUs to share a single network connection and IP address.

Suited for rack administrators who need

IT teams managing multiple rack PDUs benefit from aggregated remote monitoring and ±1% billing-grade accuracy for precise power tracking. The hot-swap meter allows maintenance without interrupting connected loads. Facilities requiring outlet-level switching or remote reboot capability will not find those functions in this metered-input model.

Input voltage 120 V AC

This PDU operates exclusively at 120 V AC input and output, so it must match the facility supply voltage. The twelve NEMA 5-20R receptacles determine which equipment plugs can be connected directly. Verify that your rack power infrastructure provides a compatible 120 V source and that the horizontal form factor fits your mounting space.

Přednosti

  • Remote current monitoring per section via network
  • Local LCD display enables phase balancing and provisioning
  • ±1 % billing-grade metering accuracy
  • Hot-swap meter allows maintenance without downtime
  • Daisy-chain up to four units on one IP

Specifikace

BrandEaton
SeriesMetered
ModelEMIT01-10
TypeConsumer Electronics
Input Voltage120 V AC
Output Voltage120 V AC
FeaturesPackage Contents:
ePDU Metered EMIT01-10 12-Outlet PDU
SPK021-Installation
SPK013-Network
Power Rating:1.92 kVA
Form Factor:Horizontal
Product Name:ePDU Metered EMIT01-10 12-Outlet PDU
Output Receptacles:12 x NEMA 5-20R
Product Type:PDU
Power Rating:1.92 kVA
Form Factor:Horizontal
Input Receptacles:1 x NEMA L5-20P
Přepravní hmotnost5.53 kg
Rozměry balení520 × 500 × 180 mm

Otázky k tomuto produktu

How is the hot-swap meter replaced on this EMIT01-10 PDU?

The unit features a hot-swap meter that can be removed and replaced without powering down the PDU or interrupting power to the connected equipment.

What is the maximum sustained load the 1.92 kVA rating supports on the 120 V input?

The 1.92 kVA rating at 120 V defines the apparent power limit; sustained loads must stay within this capacity to avoid overloading the input circuit.

How much heat and noise does the PDU produce when running continuously?

The PDU has no moving parts or fans, so it operates silently and generates minimal heat, limited to the small losses of the metering electronics and display.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.