Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black 2.5 inch drive bracket with 40cm SATA cable

EN-Labs

EN-Labs PCIBR25SSDKIT 2.5" PCIe Mounting Bracket with 40cm SATA Cable

SKU CH-1C7M-3CF4A

Mounts a 2.5" SATA drive in a PCIe slot using the included 40cm or 70cm 22-pin SATA data and power cable

  • Cable Length40cm SATA Data & Power Adapter Cable
  • FeaturesSimply attach your existing 2.5 storage device and simply sl
  • Converts a PCIe slot into a 2.5" drive bay
  • Includes a 40cm SATA data and power cable
  • Non-conductive polycarbonate frame protects the drive
  • Integral riser bracket ensures secure mounting
  • Compatible with any 2.5" SATA HDD or SSD

2.5" PCIe Mounting Bracket

The EN-Labs PCIBR25SSDKIT converts a standard PCIe expansion slot into a secure mount for any 2.5" SATA HDD or SSD. It targets builders whose front drive bays are full but who still have a free rear slot in a PC, server or rack-mount chassis.

70cm SATA Data and Power Cable

A 70cm 22-pin SATA cable ships in the kit, delivering both data and power to the mounted drive without a separate power lead. The cable length lets you route cleanly to motherboard headers and the PSU in most tower or rack layouts.

Polycarbonate Non-Conductive Chassis

The bracket moulds the drive cradle and PCIe bracket from polycarbonate, so the PCIe edge connector is electrically isolated. An integral riser bracket screws into the case slot for a firm hold, while the drive fastens inside the cradle for vibration-resistant mounting.

Přednosti

  • Converts a PCIe slot into a 2.5" drive bay
  • Includes a 40cm SATA data and power cable
  • Non-conductive polycarbonate frame protects the drive
  • Integral riser bracket ensures secure mounting
  • Compatible with any 2.5" SATA HDD or SSD

Specifikace

BrandEN-Labs
SeriesHard Drive Adapters
ModelPCIBR25SSDKIT
Cable Length40cm SATA Data & Power Adapter Cable
FeaturesSimply attach your existing 2.5 storage device and simply slot the SSD-PCI into a PCIe slot (which the PCIe connector is also non-conductive of course!) and screw down the integral riser bracket as you would normally do on any PCIe adapter card. Its that easy. Ideal for when space to add extra storage drivers is running low, such as a fully populated front drive bay, the SSD-PCI is a low-cost and simple device which will give your systems the ability to add extra storage in no time. Polycarbonate, non-conductive SSD/HDU chassis Ideal cradle for 2.5 form-factor storage devices Fits in

Otázky k tomuto produktu

Will the 40cm SATA cable or the 2.5" bracket need replacement after extended use?

The polycarbonate bracket is non-conductive and designed for permanent installation in a PCIe slot, while the 40cm SATA data and power cable is a passive component with no moving parts, so neither item requires scheduled replacement.

What limits how many 2.5" drives I can install with this bracket?

Each PCIBR25SSDKIT occupies one standard PCIe expansion slot and holds a single 2.5" SATA or IDE drive, so the number of available PCIe slots in your chassis is the limiting factor.

Does the bracket or cable add noticeable heat or noise when the system runs all day?

The bracket has no active electronics or fans, and the SATA cable is passive, so the kit adds no audible noise and negligible thermal load during continuous operation.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.