Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black standalone duplicator with 16x2 LCD and four M.2 NVMe slots

EZ Dupe, Inc.

EZ Dupe NVMe Cyclone 600 1-to-4 Duplicator

SKU CH-DASC-9AVVG

Standalone M.2 duplicator copies up to four NVMe drives at 600 MB/s with five copy modes and seven erase modes

  • TypeNVMe Duplicator
  • Panel ColorBlack
  • Operating TypeStandalone
  • Display16 x 2 LCD
  • ConnectorM.2 NVME
  • Target1 to 4

Target 1 to 4

Speed 600MB/Sec (36GB/Min)

Option M.2 NVME

  • Standalone operation with 16×2 LCD
  • Copies up to 4 M.2 NVMe drives at 600 MB/s
  • Five copy modes including Whole Media and Non-zero
  • Seven erase modes including DoD 3-Pass and Secure Erase
  • Daisy-chain up to 255 units for mass deployment

Target workloads

The EZ Dupe NVMe Cyclone 600 is a standalone duplicator that copies one M.2 NVMe source to up to four targets at once. It handles B-key, M-key and B+M-key modules with MBR or GPT partitioning. Five copy modes include Whole Media, System and Files, All Partitions, Percentage and Non-zero copy. Seven erase modes cover Quick Erase, Full Erase, DoD 3-Pass, DoD 7-Pass, Secure Erase, Enhance Erase and HPA area Erase. Data moves at 600MB/s with real-time copy-and-compare verification.

Slot and power checks

Verify that each target drive fits the M.2 slot form factor and keying used by your modules. The unit runs on 115-230 V AC at 50/60 Hz, so confirm the local mains supply matches that range. A 16 x 2 LCD panel shows status during operation. Buffer memory is 128M and the Athena Controller manages the transfer. No host computer is required for standalone use.

Scale and speed upgrade

This duplicator replaces single-target copiers when you need four simultaneous clones at 600MB/s instead of 300MB/s. Daisy-chaining supports up to 255 linked units for larger batch jobs. Event logs with time stamps and drive IDs download to the first destination slot for audit trails. It is not suited for workflows that require more than four targets per chassis or that depend on interfaces other than NVMe and SATA.

Přednosti

  • Standalone operation with 16×2 LCD
  • Copies up to 4 M.2 NVMe drives at 600 MB/s
  • Five copy modes including Whole Media and Non-zero
  • Seven erase modes including DoD 3-Pass and Secure Erase
  • Daisy-chain up to 255 units for mass deployment

Specifikace

BrandEZ Dupe
TypeNVMe Duplicator
ModelNVMe Cyclone 600
Part NumberDM-HE6-5M04PC
Panel ColorBlack
Operating TypeStandalone
Display16 x 2 LCD
ConnectorM.2 NVME
Target1 to 4
Buffer Memory128M
ControllerAthena Controller
Supported MediaM.2 NVMe
Data Transfer Rate600MB/s
Load TypeSlot
Key FeaturesStandalone
Power SupplyAC: 115-230 V, 50/60 Hz

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Does the duplicator ship with M.2 NVMe drives or do I need to supply them?

The unit is a standalone duplicator with four target slots; drives are not included and must be purchased separately.

When should I choose the 1-to-4 Cyclone 600 over the 1-to-9 or 300 MB/s models?

Pick this model when you need up to four simultaneous copies at the faster 600 MB/s transfer rate.

What does the 600 MB/s headline rate mean when copying a drive in my workstation?

It is the maximum sustained throughput the duplicator can deliver across its four M.2 NVMe slots during a copy operation.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.