Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Square black 92mm frame 25mm thick double ball bearing cooling fan

Fans

Fans TA300DC 12V 0.50A 92x92x25mm double ball bearing case fan

SKU CH-1846-GNC9M MPN TA300DC

A 12 V case fan with a 92 x 92 x 25 mm frame and double ball bearing for reliable chassis cooling

  • Double ball bearing reduces wear for longer service life
  • 12 V DC 0.50 A draws minimal power from the supply
  • Compact 92 x 92 x 25 mm frame fits tight chassis spaces
  • Japan Nidec manufacture ensures consistent quality control
  • Maintenance-free bearing design eliminates lubrication intervals

Compact 92 mm DC cooling fan

The Fans TA300DC is a 12 V axial case fan measuring 92 x 92 x 25 mm. It uses a maintenance-free double ball bearing for long service life. The unit draws 0.50 A and is built with original Nidec components for reliable airflow in chassis and power-supply cooling roles.

Check voltage current and mounting before ordering

Verify that your system provides a 12 V DC header or supply capable of delivering 0.50 A. Confirm the mounting holes match a 92 mm square pattern and that 25 mm thickness clears adjacent components. The fan uses a standard two-wire connection so ensure your board or controller has a compatible pinout.

Replaces worn 92 mm sleeve or ball-bearing fans

This model upgrades older 92 mm fans that have developed noise or reduced airflow due to bearing wear. The double ball bearing design resists dust and temperature cycling better than sleeve equivalents. The jump is worth it when the existing fan rattles, stalls at start-up or no longer moves enough air to keep internal temperatures stable.

Přednosti

  • Double ball bearing reduces wear for longer service life
  • 12 V DC 0.50 A draws minimal power from the supply
  • Compact 92 x 92 x 25 mm frame fits tight chassis spaces
  • Japan Nidec manufacture ensures consistent quality control
  • Maintenance-free bearing design eliminates lubrication intervals

Specifikace

Pro tento produkt zatím nejsou zveřejněny žádné specifikace.

Otázky k tomuto produktu

Does the TA300DC include mounting screws or a power adapter, or must they be bought separately?

The TA300DC is supplied as the fan unit only; mounting screws and any power adapter are not included and must be sourced separately.

The listing shows 92×92×25 mm and also 9025 — which dimension should I use to confirm fit in my chassis?

Treat the 92×92×25 mm figure as the primary mounting footprint; 9025 is an alternative industry reference for the same 92 mm square, 25 mm thick frame.

What does the 0.50 A current draw mean for a standard 12 V fan header on a motherboard?

At 0.50 A the TA300DC draws 6 W, well within the 1 A limit of most 12 V 4-pin or 3-pin headers, so it can be powered directly without an extra controller.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.