Fujitsu
Fujitsu MBB2147RC 146GB SAS 10000 RPM 2.5" internal hard drive
A 146 GB SAS hard drive spinning at 10000 RPM with 16 MB cache in a 2.5 inch form factor
- InterfaceSAS
- Capacity146GB
- RPM10000 RPM
- Cache16MB
- Form Factor2.5"
- 10000 RPM spindle accelerates data access for transaction-heavy workloads
- SAS interface delivers dual-port reliability for enterprise arrays
- 146 GB capacity fits operating system and critical applications
- 16 MB cache buffers bursts to sustain throughput
- 5 inch form factor enables dense server and storage deployments
146 GB SAS 10000 RPM drive
The Fujitsu MBB2147RC is a 2.5 inch internal hard drive with a 146 GB capacity and a 10000 RPM spindle speed. It uses a SAS interface and includes a 16 MB cache. The unit is supplied new in a caddy suitable for compatible drive bays.
Who this suits and who it does not
This drive fits servers or workstations that require a SAS connected 2.5 inch drive running at 10000 RPM. Buyers whose systems only accept a different physical interface or a 3.5 inch form factor cannot use this unit.
The specification that decides fit
The SAS interface is the single specification that determines whether this drive will connect to your controller or backplane. Verify that your hardware supports SAS before purchasing.
Přednosti
- 10000 RPM spindle accelerates data access for transaction-heavy workloads
- SAS interface delivers dual-port reliability for enterprise arrays
- 146 GB capacity fits operating system and critical applications
- 16 MB cache buffers bursts to sustain throughput
- 5 inch form factor enables dense server and storage deployments
Specifikace
| Brand | HP |
|---|---|
| Model | MBB2147RC |
| Interface | SAS |
| Capacity | 146GB |
| RPM | 10000 RPM |
| Cache | 16MB |
| Form Factor | 2.5" |
Otázky k tomuto produktu
How do I install the 2.5" SAS drive into a 3.5" server bay using the supplied caddy?
Slide the drive into the caddy until the SAS connector seats, secure the four side screws, then insert the assembly into the hot-swap bay until the latch clicks.
Which component of the MBB2147RC is most likely to need replacement after several years of continuous operation?
The 10000 RPM spindle motor and actuator bearings wear first; the 16 MB cache and SAS interface electronics typically outlast the mechanical parts.
At what point does sustained write throughput hit a ceiling on this 146 GB 10000 RPM SAS drive?
Sequential writes saturate the SAS bus once the outer cylinders fill; inner-cylinder transfers drop toward 100 MB/s, limiting sustained large-file writes.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
