Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

G.SKILL

G.SKILL F4-3000C15D-16GVKB 16GB DDR4 3000 CL15 desktop RAM

SKU CH-4XZE-B2CW4 MPN F4-3000C15D-16GVKB

Dual-channel 16 GB DDR4 kit at 3000 MT/s with CL15 15-16-16-35 timing, 1.35 V and aluminium heat spreaders

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 3000 (PC4 24000)
  • CAS LatencyCL15
  • Timing15-16-16-35
  • Voltage1.35V
  • ECCNo

Capacity 16GB (2 x 8GB)

Speed DDR4 3000 (PC4 24000)

CAS Latency · Color · Fan Included CL15 · Black · No

  • Dual-channel 16 GB kit enables smoother multitasking
  • 3000 MT/s speed accelerates gaming and rendering workloads
  • CL15 15-16-16-35 timings reduce latency for snappy response
  • 35 V operation lowers power draw and heat output
  • Intel XMP 2.0 profile simplifies one-click overclocking setup

Ripjaws V DDR4 3000 kit

This G.SKILL Ripjaws V kit delivers 16 GB of DDR4 memory in a dual-channel 2 x 8 GB configuration. Rated at DDR4 3000 with CL15 15-16-16-35 timings and 1.35 V operation, it targets gaming and high-performance desktop builds. The black aluminum heat spreader aids thermal management during sustained workloads.

Motherboard DDR4 slot and XMP readiness

Verify your board has four 288-pin DDR4 slots and supports Intel XMP 2.0 profiles to reach the rated 3000 MT/s speed. The kit runs at 1.35 V, so confirm the platform can supply that voltage without manual adjustment. Ensure the CPU memory controller is validated for DDR4 3000 operation to avoid defaulting to lower speeds.

Enthusiasts wanting low-latency DDR4

Builders who prioritise CL15 latency at 3000 MT/s for responsive gaming or content creation will benefit from this kit. Users restricted to DDR4 2133 or 2400 by older chipsets cannot utilise the rated frequency. Systems requiring ECC or registered modules should select a different product class.

Přednosti

  • Dual-channel 16 GB kit enables smoother multitasking
  • 3000 MT/s speed accelerates gaming and rendering workloads
  • CL15 15-16-16-35 timings reduce latency for snappy response
  • 35 V operation lowers power draw and heat output
  • Intel XMP 2.0 profile simplifies one-click overclocking setup

Specifikace

BrandG.SKILL
SeriesRipjaws V Series
ModelF4-3000C15D-16GVKB
Capacity16GB (2 x 8GB)
SpeedDDR4 3000 (PC4 24000)
CAS LatencyCL15
Timing15-16-16-35
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
BIOS/Performance ProfileIntel XMP 2.0
ColorBlack
Heat SpreaderYes
FeaturesExtreme performance DDR4 memory designed for gaming and PC enthusiasts
Optimized compatibility with DDR4-compatible Intel Core platforms
Sleek and stylish aluminum heat spreader design
1.35V ultra low voltage
Intel XMP 2.0 support
Recommend UseHigh Performance or Gaming Memory
Přepravní hmotnost0.13 kg
Rozměry balení206 × 133 × 18 mm

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Will this kit run at 3000 MHz on a motherboard that only supports 2133 MHz by default?

The modules default to 2133 MHz; enabling the XMP 2.0 profile in the BIOS is required to reach 3000 MHz.

Is the 1.35 V operating voltage safe for a standard DDR4 motherboard?

Yes, 1.35 V is within the normal DDR4 range and the kit is validated for Intel Core platforms.

Does the aluminum heat spreader add enough height to interfere with large CPU coolers?

The low-profile Ripjaws V spreader is designed to clear most tower coolers, but verify your cooler’s clearance spec.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.