Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Two black aluminium heatspreaders with full-length RGB light bars

G.SKILL

G.SKILL F4-3600C18D-16GTZRX Trident Z RGB 16GB DDR4 3600 CL18 desktop RAM

SKU CH-QSTE-GXTJX MPN F4-3600C18D-16GTZRX

16 GB dual-channel DDR4 3600 CL18 kit with RGB light bar, hand-screened ICs and aluminium heatspreaders, tuned for AMD Ryzen X570 and B550 platforms

  • Capacity16GB (2 x 8GB)
  • Type288-Pin PC RAM
  • SpeedDDR4 3600 (PC4 28800)
  • CAS LatencyCL18
  • Timing18-22-22-42
  • Voltage1.35V

Capacity 16GB (2 x 8GB)

Speed DDR4 3600 (PC4 28800)

CAS Latency CL18

  • Optimised for AMD Ryzen platforms with X570 and B550 chipsets
  • Dual-channel 16 GB kit delivers 3600 MT/s DDR4 speed
  • CL18 latency with 18-22-22-42 timings at 1.35 V
  • Hand-screened ICs on 10-layer PCB support Intel XMP 2.0 profiles
  • Full-length RGB light bar with fluid rainbow wave default effect

AMD-optimised DDR4 kit

This 16 GB dual-channel kit delivers DDR4 3600 speed with CL18 18-22-22-42 timings at 1.35 V. Hand-screened ICs sit on a custom 10-layer PCB beneath black aluminium heatspreaders. A full-length uncovered light bar provides fluid rainbow wave RGB lighting out of the box.

Ideal for Ryzen X570 and B550 builds

The kit is tuned for AMD platforms including X570 and B550 chipsets and also supports Intel Z790 DDR4, Z690 DDR4, Z590, Z490 and Z390. Builders targeting other chipsets or requiring ECC should consider different memory.

XMP 2.0 profile at DDR4 3600 CL18

The decisive specification is the Intel XMP 2.0 profile that sets 3600 MT/s with 18-22-22-42 latency at 1.35 V. If your board and CPU can run this profile the kit will deliver its rated performance.

Přednosti

  • Optimised for AMD Ryzen platforms with X570 and B550 chipsets
  • Dual-channel 16 GB kit delivers 3600 MT/s DDR4 speed
  • CL18 latency with 18-22-22-42 timings at 1.35 V
  • Hand-screened ICs on 10-layer PCB support Intel XMP 2.0 profiles
  • Full-length RGB light bar with fluid rainbow wave default effect

Specifikace

BrandG.SKILL
SeriesTrident Z RGB (For AMD)
ModelF4-3600C18D-16GTZRX
Capacity16GB (2 x 8GB)
Type288-Pin PC RAM
SpeedDDR4 3600 (PC4 28800)
CAS LatencyCL18
Timing18-22-22-42
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
BIOS/Performance ProfileIntel XMP 2.0
ColorBlack
Heat SpreaderYes
FeaturesCompletely uncovered, full-length light bar.
Fluid rainbow wave default lighting effect.
Hand-screened ICs and custom 10-layer PCB for improved overclock performance.
Luxurious hair-line finish aluminum heatspreaders with aggressive fin design.
Intel XMP 2.0 Support
Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure.
Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware.
For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to
Recommend UseAMD X570 / B550
Intel Z790 DDR4 / Z690 DDR4 / Z590 / Z490 / Z390
LED ColorRGB
Přepravní hmotnost0.20 kg
Rozměry balení159 × 137 × 19 mm

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How hot or loud does the 1.35V Trident Z RGB kit get when running at 3600 MT/s all day?

The aluminium heatspreader and 10-layer PCB dissipate heat from the 1.35V modules. No fan is included, so the kit adds no noise of its own.

What motherboard slot and BIOS feature must my board provide for the 288-pin DDR4 kit to run at its rated speed?

A 288-pin DDR4 slot and Intel XMP 2.0 support are required to load the 18-22-22-42 profile at 3600 MT/s.

Will the 3600 MT/s CL18 kit downclock reliably on a Z390 or B550 board I already own?

Yes, the kit is validated for Z390, Z490, Z590, Z690 DDR4, Z790 DDR4 and B550 platforms and will negotiate a compatible JEDEC speed if XMP is unavailable.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.