Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Three white 120mm case fans with infinity mirror ARGB lighting on both sides, 30mm thick, hydraulic bearing, PWM control

GAMDIAS Technology

GAMDIAS Technology AEOLUS P2-1203 WH 3x120mm PWM ARGB White case fan

SKU CH-6BS6-JTQEC

Three 120 mm PWM fans with 32 ARGB LEDs, hydraulic bearings and 2400 RPM peak speed for intake or exhaust

  • Fan Counts3 Fans
  • TypePWM
  • Fan Size120mm
  • Bearing TypeHydraulic
  • RPM2400
  • Air Flow74.97 CFM
  • Cable-free daisy chaining simplifies build wiring
  • Swappable blades enable push or pull airflow setups
  • Dual infinity mirrors with 32 ARGB LEDs create vivid lighting
  • 2400 RPM delivers 74.97 CFM and 3.1 mmH₂O pressure
  • Hydraulic bearing and 30 mm thick PBT frame ensure durability

Three-fan ARGB kit for white builds

The GAMDIAS AEOLUS P2-1203 WH ships as three 120 mm PWM fans in white, each using a hydraulic bearing and spinning between 1000 and 2400 RPM. Together they move 74.97 CFM at 3.1 mmH2O static pressure, making the kit suited for intake or exhaust in mid-tower cases. A dedicated lighting controller and motherboard 5 V 3-pin addressable header support are included for ARGB synchronisation.

Cableless daisy-chain and reversible blades

The fans connect to each other without cables, reducing clutter compared with traditional daisy-chain kits that require individual leads. Each unit is 30 mm thick and includes swappable reverse blades, letting builders flip airflow direction without buying separate push or pull models. The PBT frame adds rigidity while the dual infinity-mirror panels put 32 LEDs on both sides of every fan.

Tool-free blade swap, check header first

Blade changes are tool-free; pull the old blade off and press the replacement into place until it clicks. The only common snag is forgetting that the ARGB signal needs a 5 V 3-pin addressable header — 12 V 4-pin RGB headers will not work and can damage the lighting. Ensure the included fan power kit is connected to a 4-pin PWM header for speed control.

Přednosti

  • Cable-free daisy chaining simplifies build wiring
  • Swappable blades enable push or pull airflow setups
  • Dual infinity mirrors with 32 ARGB LEDs create vivid lighting
  • 2400 RPM delivers 74.97 CFM and 3.1 mmH₂O pressure
  • Hydraulic bearing and 30 mm thick PBT frame ensure durability

Specifikace

BrandGAMDIAS
SeriesAEOLUS
ModelP2
Part NumberAEOLUS P2-1203 WH
Fan Counts3 Fans
TypePWM
Fan Size120mm
Bearing TypeHydraulic
RPM2400
Air Flow74.97 CFM
Air Pressure3.1 mmH2O
Power Connector4-pin PWM
ColorWhite
LEDARGB

Otázky k tomuto produktu

Will three 120 mm fans with 30 mm thickness fit my case front panel?

Each fan measures 120 x 120 x 30 mm, so check that your front panel has clearance for three fans at that depth.

How do I connect the daisy-chain power cables and the 5 V 3-pin ARGB header without losing sync?

Plug the included fan power kit into a 4-pin PWM header, link the three fans with the cableless connectors, then attach the single 5 V 3-pin ARGB lead to the motherboard.

When should I swap the included reverse blades or replace the hydraulic bearings?

Swap blades when you want to change airflow direction; the hydraulic bearing is rated for long life, so replace only if noise or vibration appears.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.