GIONEDA
GIONEDA 2TB 2.5" SATA Internal SSD
A 2.5-inch SATA internal SSD with 2TB capacity and 3D NAND memory delivers up to 540MB/s read and 515MB/s write speeds for faster boot and application loading
- Device TypeInternal Solid State Drive (SSD)
- Form Factor2.5"
- Capacity2TB
- Memory Components3D NAND
- 300% faster than a typical hard drive with 3D NAND flash
- Sequential read speeds up to 540MB/s for rapid file access
- Sequential write speeds up to 515MB/s for quick data saving
- Ultra-low power consumption extends laptop battery life
- Backwards compatible with SATA II 3Gb/s interfaces
2TB 2.5" SATA Internal SSD
The GIONEDA 2TB 2.5" SATA Internal SSD uses 3D NAND flash to provide 2TB of storage in a standard 2.5 inch form factor. It connects via a SATA III 6Gb/s interface and is backwards compatible with SATA II. The drive is designed to upgrade the storage and boot performance of compatible laptops and desktop computers.
Who this suits and who should look elsewhere
This SSD suits users upgrading a laptop or desktop that accepts a 2.5 inch SATA drive and who want faster OS boot times and application loads than a typical hard drive provides. It is not suitable for systems that only have M.2 slots without a 2.5 inch bay or adapter, or for buyers requiring the higher throughput of a PCIe-based interface.
Sequential read speed up to 540 MB/s
The drive delivers sequential read speeds up to 540 MB/s and sequential write speeds up to 515 MB/s over the SATA interface. This speed rating is the primary specification that determines whether the drive meets the performance needs of a SATA-based upgrade.
Přednosti
- 300% faster than a typical hard drive with 3D NAND flash
- Sequential read speeds up to 540MB/s for rapid file access
- Sequential write speeds up to 515MB/s for quick data saving
- Ultra-low power consumption extends laptop battery life
- Backwards compatible with SATA II 3Gb/s interfaces
Specifikace
| Device Type | Internal Solid State Drive (SSD) |
|---|---|
| Form Factor | 2.5" |
| Capacity | 2TB |
| Memory Components | 3D NAND |
Otázky k tomuto produktu
How can I verify the GIONEDA 2TB 2.5" SATA Internal SSD is performing correctly after installation?
Check that the drive is detected at full 2TB capacity in BIOS or Disk Management and run a benchmark to confirm sequential read speeds near 540MB/s and write speeds near 515MB/s over the SATA interface.
What is included with the GIONEDA 2TB 2.5" SATA Internal SSD and what must be purchased separately?
The package contains the 2.5 inch SSD with 3D NAND flash memory; a SATA data cable, mounting bracket, cloning software licence and external enclosure are not included and must be sourced separately if required.
Which capacity of the GIONEDA 2.5" SATA SSD should I choose for my upgrade?
This model provides 2TB of storage; select it if you need roughly two terabytes for operating system, applications and media, otherwise consider the 4TB variant offered in the same series for larger libraries.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
