Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Silver 2.5 inch enterprise hard drive with SAS connector visible

HGST

HGST Ultrastar C15K600 HUC156060CSS204 600GB 15030 RPM SAS 12Gb/s 2.5" laptop hard drive

SKU CH-RYPD-CCG8J

Enterprise 2.5" SAS drive delivers 600GB at 15030 RPM with 128MB cache for Tier 0/1 workloads

  • PackagingBare Drive
  • InterfaceSAS 12Gb/s
  • Capacity600GB
  • Cache128MB
  • Average Seek Time2.9ms
  • Average Write Time3.1ms

Options SAS 512N SE

  • SAS 512N ISE
  • SAS 512N SE

Přeškrtnuté varianty existují, ale zde nejsou skladem.

  • 15,030 RPM delivers Tier 0/1 application performance
  • 128 MB cache buffer manages data efficiency
  • 12 Gb/s SAS interface moves more data quickly
  • 5-inch form factor fits dense server deployments
  • 9 ms average seek time speeds random access

Enterprise 15K SAS drive

The HGST Ultrastar C15K600 is a 600GB 2.5-inch hard drive spinning at 15030 RPM with a SAS 12Gb/s interface and 128MB cache. It targets Tier 0 and Tier 1 applications that demand the lowest latency and highest random transaction rates in enterprise servers and storage arrays. Average seek time is 2.9ms and average latency is below 2.0ms.

Compatibility checks

Verify that your system provides a SAS 12Gb/s backplane or controller and a 2.5-inch bay accepting a 14.8mm drive height. The drive uses a 512N sector format and draws power from the SAS connector; no separate power cable is required. Confirm firmware and HBA driver support for 12Gb/s operation before installation.

Bare-drive impact

The unit ships as a bare drive without rails, cables, mounting screws or software utilities. You must supply a compatible drive carrier or caddy for your server chassis and any encryption management tools if you plan to use the available ISE, TCG-SED or FIPS 140-2 certified TCG-SED security models.

Přednosti

  • 15,030 RPM delivers Tier 0/1 application performance
  • 128 MB cache buffer manages data efficiency
  • 12 Gb/s SAS interface moves more data quickly
  • 5-inch form factor fits dense server deployments
  • 9 ms average seek time speeds random access

Specifikace

BrandHGST
SeriesUltrastar C15K600
ModelHUC156060CSS204 (0B30356)
PackagingBare Drive
InterfaceSAS 12Gb/s
Capacity600GB
Cache128MB
Average Seek Time2.9ms
Average Write Time3.1ms
Average Latency<2.0ms
RPM15030 RPM
Features15,000 RPM performance for Tier 0/1 applications
Capacities up to 600GB
Industry-leading 12Gb/s SAS moves more data quickly and reliably
Compared to 15K 3.5-inch HDDs:
- 2.5X faster random write performance
- 14% faster random read performance
- 38% faster sequential performance
- 54% lower active and idle power
- 70% smaller footprint
2M hours MTBF rating
128MB cache buffer manages data efficiency
Security & encryption models including ISE, TCG-SED & FIPS 140-2 certified TCG-SED
Applications/Environments
- High Performance Computing (HPC) & other high-performance, mission-critical a
Form Factor2.5"
Height (maximum)14.8mm
Width (maximum)70.1mm
Length (maximum)100.45mm
OptionsSAS 512N SE

Otázky k tomuto produktu

Does the bare drive include mounting hardware or cables, or must they be purchased separately?

The drive ships as a bare unit only; mounting brackets, screws and SAS data/power cables are not included and must be sourced separately.

Should I choose the 512N SE option or another capacity for this 600GB model?

This listing is the single 600GB capacity with 512-byte native sectors; no other capacity or sector-size variant is offered for this part number.

How does the 15030 RPM spindle speed affect real-world latency and seek performance?

The 15030 RPM rotation yields an average latency below 2.0ms and average seek times of 2.9ms read and 3.1ms write, delivering the low-latency response expected in Tier 0/1 enterprise workloads.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.