HP
HP 861681-B21 2 TB 3.5" 7200 RPM SATA internal hard drive
2 TB 3.5" internal hard drive spinning at 7200 RPM with a SATA 6.0Gb/s interface for server storage
- InterfaceSATA 6.0Gb/s
- Capacity2TB
- NAND Flash Memory TypeHard Drive
- RPM7200 RPM
- 2 TB capacity stores large data sets
- 7200 RPM spindle speed enables fast data access
- SATA 6.0 Gb/s interface provides high transfer rates
- 5 inch form factor fits standard desktop bays
- Compatible with HPE Apollo 4200 Gen9 Server
Capacity and interface
This HP 861681-B21 is a 2 TB internal hard drive with a 3.5 inch form factor. It spins at 7200 RPM and connects through a SATA 6.0Gb/s interface. The drive is supplied new in retail or OEM packaging. It is built for desktop and server storage tasks.
Server and desktop storage fit
The drive suits administrators adding bulk capacity to an HPE Apollo 4200 Gen9 server or to a standard desktop chassis. Buyers who need solid-state speed or a 2.5 inch form factor should look at other options. It is not a flash-based device and does not fit slim bays.
7200 RPM spindle speed
The 7200 RPM spindle speed determines the sustained transfer rate and access latency for sequential workloads. This figure is the primary specification to check against your performance requirements. Verify that your system can accommodate a 3.5 inch SATA drive before purchase.
Přednosti
- 2 TB capacity stores large data sets
- 7200 RPM spindle speed enables fast data access
- SATA 6.0 Gb/s interface provides high transfer rates
- 5 inch form factor fits standard desktop bays
- Compatible with HPE Apollo 4200 Gen9 Server
Specifikace
| Brand | HP |
|---|---|
| Interface | SATA 6.0Gb/s |
| Capacity | 2TB |
| NAND Flash Memory Type | Hard Drive |
| RPM | 7200 RPM |
| Přepravní hmotnost | 1.15 kg |
| Rozměry balení | 406 × 305 × 254 mm |
Otázky k tomuto produktu
How much heat or noise does the 7200 RPM drive produce when running continuously?
The 7200 RPM spindle speed and SATA 6.0Gb/s interface are designed for typical server workloads; actual acoustics and temperature depend on the chassis airflow and mounting.
What SATA host connector and power cable does the 3.5" drive need to operate?
The drive uses a standard SATA data port and a SATA power connector; the system must provide both to function.
Will the 2 TB SATA drive work in an older server that only supports SATA 3.0Gb/s?
The SATA 6.0Gb/s interface is backward compatible with SATA 3.0Gb/s controllers, so the drive will operate at the lower link speed.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
