Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
HP ProLiant ML30 Gen10 tower server in silver chassis

HP

HP ProLiant ML30 Gen10 Tower Server Xeon E-2124 64GB 16TB SATA HDDs RAID

SKU CH-MNHP-2Z6GH

Tower server with Xeon E-2124, 64GB DDR4, 16TB SATA RAID and iLO 5 remote management

  • Chassis TypeTower
  • Quad-core Xeon at 3.3 GHz powers demanding workloads
  • 64 GB DDR4 memory handles multi-tasking with ease
  • 16 TB across four SATA drives stores massive datasets
  • Smart Array S100i RAID protects data against drive failure
  • iLO 5 remote management simplifies server administration

HP ProLiant ML30 Gen10 tower server

The HP ProLiant ML30 Gen10 tower server ships new with an Intel Xeon E-2124 quad-core processor running at 3.3GHz. It includes 64GB of DDR4 memory across four 16GB modules and 16TB of storage via four 4TB 3.5-inch SATA hard drives. The HP Smart Array S100i Gen10 controller manages RAID, while dual-port 1Gb Ethernet and iLO 5 provide connectivity and remote management.

SATA 6Gb/s interface and 7.2K drive speed

The four SATA hard drives operate at 6Gb/s with a 7.2K rotational speed, which defines the practical throughput ceiling for the array. The HP Smart Array S100i Gen10 controller supports RAID across these drives but is limited to the SATA interface bandwidth. The single power supply and dual-port 1Gb Ethernet adapter set fixed limits on power redundancy and network throughput for the chassis.

Memory and drives require separate installation

The 64GB DDR4 memory kit and four 3.5-inch SATA hard drives are supplied separately and must be installed before use. The tower chassis provides tool-less access to drive bays and DIMM slots, though the single power supply offers no redundancy during the build. First-time installers should verify drive seating and memory alignment to avoid POST errors or degraded RAID initialisation.

Přednosti

  • Quad-core Xeon at 3.3 GHz powers demanding workloads
  • 64 GB DDR4 memory handles multi-tasking with ease
  • 16 TB across four SATA drives stores massive datasets
  • Smart Array S100i RAID protects data against drive failure
  • iLO 5 remote management simplifies server administration

Specifikace

Chassis TypeTower

Otázky k tomuto produktu

Should I choose the 64GB DDR4 kit or add more memory later?

The server ships with 64GB across four 16GB DDR4 2666MHz modules, filling all available slots; expanding further would require replacing existing sticks.

What does the Xeon E-2124 3.3GHz quad-core actually deliver in this tower?

The E-2124 runs at 3.3GHz with 8MB cache, giving four physical cores for steady multi-threaded workloads such as file serving, light virtualization or database tasks.

How does the S100i RAID controller limit the four 4TB SATA drives?

The Smart Array S100i provides software RAID 0, 1, 5 and 10 on the 6Gb/s SATA ports, so the 16TB raw capacity drops to 12TB in RAID 5 or 8TB in RAID 10.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.