Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Silver 3.5 inch SAS hard drive with black carrier tray

HPE

HPE 861607-001 8 TB 3.5" 7200 rpm SAS internal hard drive

SKU CH-Z81B-SX654

An 8 TB internal SAS hard drive with a 12 Gb/s interface, 7200 rpm spindle speed and 3.5" form factor including a drive carrier for HP ProLiant Gen8/Gen9 servers

  • 8 TB capacity stores large server datasets
  • 7200 rpm spindle speed delivers consistent throughput
  • 12Gb/s SAS interface enables fast data transfer
  • 5" form factor with carrier fits ProLiant Gen8/Gen9 bays
  • New condition ensures full manufacturer reliability

8 TB SAS drive for HP ProLiant servers

This HPE 861607-001 hard drive provides 8 TB of storage on a 12Gb/s SAS interface. It spins at 7200 rpm in a 3.5" form factor and includes a drive carrier. The unit is designed for internal installation in compatible HP ProLiant Gen8 and Gen9 servers.

Replaces lower-capacity

The jump is worthwhile when existing 3.5" SAS drives no longer meet capacity or throughput needs for server workloads. Moving from smaller or 6Gb/s SAS drives to this 8 TB 12Gb/s model adds space and interface bandwidth in the same form factor. The carrier ensures a direct mechanical fit in supported drive bays.

Verify server generation and SAS backplane support

Confirm the system is an HP ProLiant Gen8 or Gen9 model before ordering. Ensure the backplane and controller support 12Gb/s SAS operation to use the full interface speed. Check that a 3.5" drive bay with carrier mounting is available. This drive is not suited for desktop PCs or enclosures lacking SAS connectivity.

Přednosti

  • 8 TB capacity stores large server datasets
  • 7200 rpm spindle speed delivers consistent throughput
  • 12Gb/s SAS interface enables fast data transfer
  • 5" form factor with carrier fits ProLiant Gen8/Gen9 bays
  • New condition ensures full manufacturer reliability

Specifikace

BrandHPE

Otázky k tomuto produktu

What server bays accept the 3.5" form factor of the HPE 861607-001?

The drive uses a standard 3.5" form factor and includes a carrier, so it fits the hot-plug bays of HP ProLiant Gen8 and Gen9 servers.

How is the 12Gb/s SAS drive installed in a ProLiant Gen8 or Gen9 server?

Slide the carrier into an empty hot-plug bay until the latch clicks; the step often missed is fully seating the SAS connector before locking the lever.

When should the 7200 rpm SAS drive be replaced in a server array?

Replace it when SMART reports reallocated sectors, the array controller flags predictive failure, or the drive exceeds its rated workload limit.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.