Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Silver rectangular blade server with front drive bays and integrated handle

HPE

HPE BL460c G10 Blade Server 2x Xeon Bronze 3104 32GB DDR4 2x 300GB SAS

SKU CH-9GK2-MV46N

Blade server with two 1.7 GHz Xeon Bronze 3104 CPUs, 32 GB DDR4 memory, two 300 GB SAS drives and iLO remote management

  • TypeBlade
  • CPU TypeIntel Xeon
  • CPU Speed1.7 GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size32GB
  • Dual Xeon Bronze 3104 processors deliver 12 cores at 1.7 GHz
  • 32 GB DDR4 ECC registered memory scales to 128 GB
  • Two 300 GB 10 K SAS drives on Smart Array P204i-b SR controller
  • Integrated Lights-Out Advanced enables remote firmware updates and monitoring
  • FlexFabric 20 Gb dual-port adapter provides high-speed network connectivity

Blade server for virtualised workloads

The HPE BL460c G10 fits two Xeon Bronze 3104 processors running at 1.7 GHz with six cores each and 8.25 MB cache. Thirty-two gigabytes of DDR4 ECC registered memory are installed and the system supports up to 128 GB. Dual 300 GB 10K SAS drives connect through a Smart Array P204i-b SR Gen10 controller and a FlexFabric 20 GB 2-port adapter provides network connectivity.

Suited for density-focused deployments

This half-height blade targets environments that need compute density in a c-Class enclosure with shared power and cooling. Buyers who need local GPU acceleration or more than two internal drives should look at a different form factor. The integrated iLO Advanced remote management is included for out-of-band administration.

Verify enclosure and firmware baseline

Confirm the c-Class enclosure has available half-height bays and compatible interconnect modules for the FlexFabric adapter. Check that the installed iLO firmware version matches your management platform requirements before deployment. Ensure the Smart Array controller firmware is current for the RAID level you intend to configure.

Přednosti

  • Dual Xeon Bronze 3104 processors deliver 12 cores at 1.7 GHz
  • 32 GB DDR4 ECC registered memory scales to 128 GB
  • Two 300 GB 10 K SAS drives on Smart Array P204i-b SR controller
  • Integrated Lights-Out Advanced enables remote firmware updates and monitoring
  • FlexFabric 20 Gb dual-port adapter provides high-speed network connectivity

Specifikace

BrandHP
SeriesProliant BL
ModelBlade
TypeBlade
CPU TypeIntel Xeon
CPU Speed1.7 GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size32GB
Memory TypeDDR4 SDRAM
Max Memory Capacity128GB
Hard Drive (Installed)600,00
Storage ControllerHP Smart Array P204i-b SR Controller
HDD InterfaceSAS
GPU TypeIntegrated Graphics
Remote ManagementIntegrated Lights-Out (iLO) Advanced
Dimensions22 x 22x 10 in
Weight20

Otázky k tomuto produktu

Which enclosure is required to install the BL460c G10 blade server?

The BL460c G10 fits HPE c-Class enclosures that provide power, cooling and interconnect modules for blade operation.

Can the Smart Array P204i-b SR controller manage the existing 300 GB SAS drives together with older SAS drives I keep?

The P204i-b SR supports SAS connectivity so it can manage the installed 300 GB 10K drives alongside other compatible SAS drives in the same array.

How do I verify the iLO Advanced remote management is active after the blade is seated?

Open a browser to the iLO IP address shown on the enclosure display; the iLO Advanced login page confirms the remote management firmware is running.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.