Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Silver 3.5 inch SAS hard drive in black caddy tray

IBM

IBM 6TB 7.2K 12Gb/s SAS 3.5" internal hard drive ST6000NM0034

SKU CH-R3GK-KBVGT

Stores 6 TB on a 3.5" SAS drive spinning at 7200 RPM with a 12 Gb/s interface and includes a System X caddy

  • 6 TB capacity stores large data sets
  • 7200 RPM spindle speed delivers consistent throughput
  • 12 Gb/s SAS interface enables fast host transfers
  • 5 inch form factor fits standard drive bays
  • Includes SYSTEM X caddy for direct installation

6TB SAS drive for System x bays

This 6TB 3.5 inch SAS hard drive spins at 7200RPM and connects at 12Gbps. It is built for IBM System x servers and ships with the matching System x caddy or tray. The drive suits nearline storage workloads that need high capacity and reliable throughput.

Install with the included caddy

The supplied System x tray aligns the drive with the server backplane so no extra brackets are needed. Slide the assembly into a hot-swap bay until the lever locks. A common issue is forgetting to engage the lever fully, which leaves the SAS connector unseated and the drive invisible to the controller.

6TB capacity for bulk data

Six terabytes hold large backup sets, media archives or surveillance footage with room to grow. Sequential transfers benefit from the 12Gbps SAS link and 7200RPM spindle. Random I/O heavy workloads such as databases or virtual machine clusters will saturate the mechanical limits before the interface does.

Přednosti

  • 6 TB capacity stores large data sets
  • 7200 RPM spindle speed delivers consistent throughput
  • 12 Gb/s SAS interface enables fast host transfers
  • 5 inch form factor fits standard drive bays
  • Includes SYSTEM X caddy for direct installation

Specifikace

Pro tento produkt zatím nejsou zveřejněny žádné specifikace.

Otázky k tomuto produktu

How do I verify the 7200RPM SAS drive is spinning correctly after installation?

Listen for the motor spin-up and check the controller BIOS or OS disk utility to confirm the 6TB capacity and 12Gb/s link speed are detected.

Does the 3.5" SAS hard drive ship with the SYSTEM X caddy and are any cables required?

The unit includes the SYSTEM X caddy; a SAS data cable and compatible backplane or HBA must be supplied separately.

Which part number — 00FN229, 00FN228 or 00FN232 — matches my System X server tray?

All three part numbers refer to the same 6TB 7200RPM SAS drive with caddy; choose the one listed in your server’s parts catalogue.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.