Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black metal four-bay cage for 2.5 inch drives in a 5.25 inch bay

ICY DOCK

ICY DOCK MB607SP-B 4 bay 2.5" SATA hdd accessory

SKU CH-ARP9-916AE MPN MB607SP-B

Converts one 5.25" bay into four hot-swappable 2.5" SATA or SAS drive slots with a 40 mm fan and three speed modes

  • ColorBlack
  • Conversion Tray4 x 2.5" Drive to 5.25" Bay
  • Mobile Rack Drives Support4 x 2.5" Drives to 5.25" Bay
  • Mobile Rack InterfaceSATA I/II/III
  • Protection CaseMultiple Drives
  • Compatible Products2.5"

Model ToughArmors 4BAY - Lite

Zobrazit dalších 4 konfigurací

Přeškrtnuté varianty existují, ale zde nejsou skladem.

Option 4-Bay (2.5in SATA/SAS)

Přeškrtnuté varianty existují, ale zde nejsou skladem.

  • Holds four 2.5" SATA drives in one 5.25" bay
  • Full metal chassis meets medical and military rugged standards
  • Tool-free hot-swap lets you change drives without powering down
  • Three-speed 40 mm fan optimises cooling for SSD or HDD use
  • Single 15-pin SATA power connector cuts cable clutter

Four-bay 2.5" SATA cage for 5.25" bay

The ICY DOCK MB607SP-B fits four 2.5" SATA or SAS drives into one external half-height 5.25" bay. It is built for industrial PCs, medical and military systems that need rugged, hot-swap storage in a single front-access slot.

Holds four drives from 7 mm to 15 mm thick

Each bay accepts 2.5" SSDs or hard drives up to 15 mm height, delivering up to 6 Gb/s per drive depending on the drive itself. The single 40 mm fan offers three speed modes so cooling matches SSD or mechanical drive workloads.

Requires one 5.25" bay and four SATA ports

Installation needs a single external 5.25" bay, four 7-pin SATA data cables and one 15-pin SATA power connector. Systems without a free 5.25" bay or insufficient SATA connections cannot use this cage.

Přednosti

  • Holds four 2.5" SATA drives in one 5.25" bay
  • Full metal chassis meets medical and military rugged standards
  • Tool-free hot-swap lets you change drives without powering down
  • Three-speed 40 mm fan optimises cooling for SSD or HDD use
  • Single 15-pin SATA power connector cuts cable clutter

Specifikace

BrandICY DOCK
ModelMB607SP-B
ColorBlack
Conversion Tray4 x 2.5" Drive to 5.25" Bay
Mobile Rack Drives Support4 x 2.5" Drives to 5.25" Bay
Mobile Rack InterfaceSATA I/II/III
Protection CaseMultiple Drives
Compatible Products2.5"
SpecificationsHost Interface: 4 x 7pin SATA
Drive Fit: 4 x 2.5" SATA I / II / III SSD or hard drive
Device Fit: Single external half height 5.25" bay
Transfer Rate: Up to 6 Gb/sec. (depending on hard drive speed)
Power Input: 1 x 15pin SATA power port
Insert& Extract connection Via: Direct SATA hard drive connection
Structure: Metal
Drive Cooling: Singlel 40mm rear cooling fan + fan power switch, Metal heat dispersion
Power Indicator: Solid green LED
HDD Access Indicator: Flashing green LED
FeaturesFull steel construction commercially designed for Medical & Military systems, Media servers, and IPCs, approved & used by Tier 1 companies.
Perfect for rugged applications and complies to flammability requirements
Fits 4 x 7mm to 15mm 2.5” SAS/SATA HDD or SSD in a single external 5.25” bay for high performance RAID applications.
Requires only a single 15pin power connectors to power all 4 bays
Anti-Vibration Technology (AVT) - creates a safe environment for hard drives or SSDs
Active Power Technology (APT) - individual led & cooling fan only powers up if there is a drive installed in
Přepravní hmotnost0.93 kg
Rozměry balení165 × 165 × 56 mm

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Will the 4-bay MB607SP-B cage fit in my older case that only has a single external 5.25" bay?

Yes, the MB607SP-B occupies exactly one external half-height 5.25" bay while holding four 2.5" SATA drives.

How can I confirm the 40 mm fan is cooling my drives properly after installation?

The fan has a 3-mode speed switch — off, low for SSDs, high for mechanical drives — so you can hear and feel the airflow change when you toggle it.

Does the MB607SP-B ship with the four SATA data cables and the 15-pin SATA power cable I need, or must I buy them separately?

The package includes the cage and a single 15-pin SATA power connector; four 7-pin SATA data cables are not included and must be purchased separately.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.