Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Small rectangular USB 3.0 card reader in black finish with multiple slots, compact 3.3 by 1.9 by .5 inches, supports 59 card types

IOGEAR

IOGEAR GFR381 USB 3.0 card reader 59 cards

SKU CH-EP0B-PSCDD MPN GFR381

A USB 3.0 multi-card reader supporting 59 formats and simultaneous read/write in a compact 3.3 x 1.9 x .5 inch design

  • TypeFlash Reader
  • Installation TypeExternal
  • InterfaceUSB 3.0
  • CompatibilityCompact Flash/Micro Drive: CF-Type I, CF-Type II, CF-Ultra I
  • Support - Compact FlashYes
  • Support - Memory StickYes
  • SuperSpeed USB 3.0 transfers data at up to 5Gbps
  • Supports up to 59 different memory card formats
  • Reads and writes multiple cards simultaneously
  • Hot-swappable and plug-n-play for instant use
  • Compact 3.3" x 1.9" x .5" design fits any workspace

Universal USB 3.0 Card Reader

The IOGEAR GFR381 is an external multi-card reader and writer connecting via SuperSpeed USB 3.0. It supports up to 59 different memory card formats including CompactFlash, SD, SDHC, SDXC, microSD, Memory Stick and MMC. The compact unit measures 3.3" x 1.9" x .5" and operates without external power. Hot-swappable plug-and-play functionality allows immediate use on compatible systems.

Photographers needing broad legacy support

This reader suits professionals and hobbyists who handle diverse card types such as CompactFlash, Olympus xD and older Memory Stick variants simultaneously. It eliminates the need for multiple single-format adapters on a desk. Users who only transfer modern SD or microSD cards may prefer a smaller, single-slot dongle. The device also does not serve builders requiring an internal 3.5-inch bay installation.

USB 3.0 interface at 5Gbps

The single specification that decides fit is the SuperSpeed USB 3.0 interface rated up to 5Gbps. This bandwidth governs maximum transfer rates from high-speed UHS-I or UDMA cards to the host computer. Systems limited to USB 2.0 ports will operate the reader at lower speeds. Buyers must verify their host has an available USB Type-A port for the supplied Micro-B to Standard-A cable.

Přednosti

  • SuperSpeed USB 3.0 transfers data at up to 5Gbps
  • Supports up to 59 different memory card formats
  • Reads and writes multiple cards simultaneously
  • Hot-swappable and plug-n-play for instant use
  • Compact 3.3" x 1.9" x .5" design fits any workspace

Specifikace

BrandIOGEAR
ModelGFR381
TypeFlash Reader
Installation TypeExternal
InterfaceUSB 3.0
CompatibilityCompact Flash/Micro Drive: CF-Type I, CF-Type II, CF-Ultra II, Microdrive, CF-Pro II, CF-Extreme, CF-Extreme III, CF-PSP II, CF-Supper, CF-Ultra X
SD/SDHC: SD, SDHC, SD-Pro, SD-Pleomax, SD-Pro C, Ultra II SD, Ultra II Plus SD, SD-Extreme III, SD-Ultra X, SD-Turbo, SD-Supper, SD Max, Mini SD, Mini SDPro,Mini SD-Pleomax, MMC, MMC-Pleomax, MMC Pro, HS-MMC, MMC Plus, MMC-Plus Turbo, RS MMC, RS MMC-Pleomax, RS MMC-Speed, RS MMC-Max, MMC Mobile, MMC Mobile-ProC, MMC Mobile-Pocketnet, MMC Micro*
Olympus DC Card: Olympus DC Card, Olympus DC Card(M), Olympus DC Card (H)
microSD/microSDHC: mic
Support - Compact FlashYes
Support - Memory StickYes
Support - MMCYes
Support - SDYes
Dimensions3.3" x 1.9" x 0.5"
FeaturesSuperSpeed USB 3.0 data transfer rate of up to 5Gbps*
Supports up to 59 different memory cards
Reads and writes multiple media cards atthe same time
Works with all popular memory cards without additional adapters required
Specifically designed for reading / writing memory cards from smartphones, tablets, cameras, and other mobile devices
Hot swappable: replace memory cards without restarting the computer
Plug-n-Play
*Device must be plugged into a USB 3.0 port in order to achieve super-speed rates.
Requirements:
PC:
Windows XP, Windows Vista, and Windows 7
Available USB port (USB 3.0
Package Contents1 x USB 3.0 Multi-Card Reader / Writer
1 x USB 3.0 Cable (Micro-B to Standard-A)
1 x Quick Start Guide
1 x Warranty Card
Přepravní hmotnost0.11 kg
Rozměry balení212 × 175 × 126 mm

Otázky k tomuto produktu

Does this reader need a USB 3.0 port on the computer to work?

It connects through the supplied Micro-B to Standard-A cable and will operate on any USB port, though SuperSpeed rates up to 5Gbps require a USB 3.0 host.

Will it read CompactFlash Type I and Type II cards that I still use?

Yes, the specifications list CF-Type I, CF-Type II and Microdrive among the supported CompactFlash formats.

How can I confirm the reader is active after plugging it in?

The device is hot-swappable and plug-and-play; the operating system will recognise it instantly and each inserted card appears as a separate drive.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.