Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black 4U rackmount server chassis with ten 5.25 inch drive bays and two 120mm fans

iStarUSA Inc.

iStarUSA Inc. D-410 4U Rackmount Server Chassis

SKU CH-JTYG-AJESV MPN D-410

Holds ten 5.25" drives in a 4U rackmount frame with dual 120 mm fans and front USB access

  • Chassis TypeRackmount
  • Form Factor4U
  • ColorBlack
  • Case MaterialZinc-Coated Steel
  • Motherboard Compatibility12" x 13"
  • External 5.25" Drive Bays10

Model D-410

  • Ten 5.25" bays give room for many drives
  • Zinc-coated steel construction resists corrosion
  • Two 120 mm fans move air through the chassis
  • 12" x 13" motherboard support fits standard server boards
  • Front USB ports add convenient external access

4U Rackmount Server Chassis

The iStarUSA D-410 is a 4U rackmount server chassis built from zinc-coated steel in a black finish. It accepts motherboards up to 12" x 13" and provides ten external 5.25" drive bays for high-density storage configurations. Two 120 mm fans are included for active airflow. Front-panel USB ports, power and HDD LEDs, plus power and reset switches complete the basic feature set.

Suited for dense storage builds.

This chassis suits integrators building rackmount servers that require many 5.25" bays in a standard 4U footprint. The front-access layout and included cooling fans support configurations with multiple optical drives or hot-swap cages. Builders needing a smaller rack height, fewer drive bays, or support for larger E-ATX boards should look at other form factors.

Ten 5.25" bays define capacity

The defining specification is the count of ten external 5.25" drive bays, which sets the maximum number of front-accessible devices the system can hold. Motherboard compatibility is limited to the 12" x 13" dimensional envelope. Cooling relies on the two included 120 mm fans. First listed by the manufacturer in 2009.

Přednosti

  • Ten 5.25" bays give room for many drives
  • Zinc-coated steel construction resists corrosion
  • Two 120 mm fans move air through the chassis
  • 12" x 13" motherboard support fits standard server boards
  • Front USB ports add convenient external access

Specifikace

BrandiStarUSA
ModelD-410
Chassis TypeRackmount
Form Factor4U
ColorBlack
Case MaterialZinc-Coated Steel
Motherboard Compatibility12" x 13"
External 5.25" Drive Bays10
Front PortsUSB
120mm Fans2
FeaturesPower and HDD LED
Power and Reset Switch
Přepravní hmotnost21.32 kg
Rozměry balení724 × 584 × 305 mm

Další verze tohoto modelu

Dalších 2 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Does the D-410 include mounting rails and a power supply, or do I need to buy them separately?

The chassis is a bare metal enclosure with two pre-installed 120 mm fans, power and reset switches, and front USB ports. Rails and a power supply are not included and must be purchased separately.

How many 5.25-inch drive bays does the D-410 provide and what motherboard size does it accept?

The unit offers ten external 5.25-inch bays and supports motherboards up to 12 by 13 inches in a standard 4U rackmount form factor.

What airflow can I expect from the two 120 mm fans once the chassis is populated with drives and a motherboard?

The pair of 120 mm fans draw cool air through the front bays and exhaust it at the rear, providing baseline cooling for ten drive bays and a full-size motherboard in a 4U rack space.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.