Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black USB 3.0 to SATA adapter cable with 22-pin connector and power port

Jansicotek

Jansicotek USB 3.0 to SATA adapter cable 2.5 3.5 inch black

SKU CH-BH4P-1W0ZH

Connects 2.5 or 3.5 inch SATA drives via USB 3.0 at 5 Gbps with UASP and includes a 12V 2A power adapter

  • ColorBlack
  • Connect 2.5 and 3.5 inch SATA drives via USB 3.0
  • Transfer data up to 5 Gbps with UASP acceleration
  • 12 V 2 A power adapter included for 3.5 inch drives
  • Plug-and-play operation with hot-swap support
  • Compatible with Windows, Mac OS X and PS4

USB 3.0 to SATA adapter

The Jansicotek USB 3.0 to SATA adapter cable connects any standard 2.5 inch or 3.5 inch SATA hard drive or solid-state drive to a computer through a USB 3.0 port. It suits users who need quick access to bare drives for backup, data recovery or drive upgrades. The cable works with Windows, Mac OS X and PS4 systems.

Plug-and-play setup with included power

Installation is straightforward: plug the SATA connector into the drive, attach the USB cable to the host and connect the supplied 12 V 2 A power adapter when using a 3.5 inch drive. The adapter is hot-swappable and requires no driver installation. The only common issue is forgetting the external power for larger drives, which prevents them from spinning up.

Handles drives up to 12 TB at 5 Gbps

The adapter supports SATA drives up to 12 TB capacity and delivers data transfer speeds up to 5 Gbps over USB 3.0. UASP support reduces processor overhead by 80 percent and can be 70 percent faster than traditional USB 3.0 when the host controller also supports UASP. Performance drops to USB 2.0 or 1.1 speeds if connected to older ports.

Přednosti

  • Connect 2.5 and 3.5 inch SATA drives via USB 3.0
  • Transfer data up to 5 Gbps with UASP acceleration
  • 12 V 2 A power adapter included for 3.5 inch drives
  • Plug-and-play operation with hot-swap support
  • Compatible with Windows, Mac OS X and PS4

Specifikace

ColorBlack

Otázky k tomuto produktu

How do I confirm the adapter is delivering up to 5 Gbps with UASP after connecting a drive?

Connect a SATA III SSD, ensure the host controller supports UASP, then verify the link speed in the operating system's device manager or system profiler shows 5 Gbps.

What comes in the box and what must I supply for a 3.5 inch drive?

The package includes the USB 3.0 to SATA 22-pin cable and a 12 V 2 A power adapter; you only need to provide the 3.5 inch SATA drive itself.

Which version should I choose for a 12 TB 3.5 inch HDD versus a 2.5 inch SSD?

One adapter handles both form factors; use the included 12 V power adapter for the 3.5 inch HDD, while the 2.5 inch SSD can run from USB bus power alone.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.