Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black USB 3.0 to SATA IDE adapter with 12V power supply

Jansicotek

Jansicotek USB 3.0 to SATA/IDE adapter with 12V 2A power adapter

SKU CH-07R2-YB00P

Connects 2.5" and 3.5" SATA or IDE drives and 5.25" optical drives via USB 3.0 with a 12V 2A power adapter included

  • ColorBlack
  • Connect 2.5" and 3.5" SATA or IDE drives via USB 3.0
  • Access three drives simultaneously for direct file transfer between them
  • Achieve up to 5 Gbps transfer speed with USB 3.0 interface
  • Supports drives up to 6 TB capacity with included 12V 2A power adapter
  • Wide compatibility with Windows, Mac OS and Linux systems

USB 3.0 SATA and IDE drive adapter

The Jansicotek adapter connects 2.5" or 3.5" SATA and IDE hard drives or SSDs and 5.25" optical drives to a USB port. It provides a SATA II connector plus 40-pin and 44-pin IDE connectors and includes a 12V 2A power supply. The device supports Windows, Mac OS and Linux systems.

Technicians migrating data from legacy drives

It suits users who need to read or copy files from older IDE or SATA disks without installing them inside a case. The adapter handles up to three drives at once for simultaneous access or drive-to-drive transfer. Builders who require an internal controller card or a permanent multi-bay enclosure should look at a different solution.

Up to 6 TB drive capacity supported

The adapter recognises drives as large as 6 TB and transfers data at up to 5 Gbps over USB 3.0. It remains backward compatible with USB 2.0 and 1.1 ports. This capacity ceiling is the key figure for deciding whether your archive drives will be recognised.

Přednosti

  • Connect 2.5" and 3.5" SATA or IDE drives via USB 3.0
  • Access three drives simultaneously for direct file transfer between them
  • Achieve up to 5 Gbps transfer speed with USB 3.0 interface
  • Supports drives up to 6 TB capacity with included 12V 2A power adapter
  • Wide compatibility with Windows, Mac OS and Linux systems

Specifikace

ColorBlack

Otázky k tomuto produktu

What SATA and IDE drives can I connect using the supplied 12 V 2 A power adapter?

The adapter powers 2.5" and 3.5" SATA HDDs or SSDs, 2.5" and 3.5" IDE HDDs, and 5.25" optical drives such as DVD-ROM, CD-RW, DVD-RW or DVD-RAM.

Will my USB 2.0 ports limit the 5 Gbps transfer rate advertised for this adapter?

The USB 3.0 interface is backward compatible with USB 2.0 and 1.1, so the adapter works on older ports but transfers at the slower host speed.

How do I confirm the adapter is communicating with all three connected drives at once?

The LED indicator shows power and activity; each drive should appear in your operating system's disk management or file explorer when the adapter is plugged in.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.