Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Three white 120mm case fans with infinity mirror centres and daisy-chain cables shown together in a triple pack

Jungle Leopard

Jungle Leopard Interstellar V2 120mm Reverse Blade Case Fan White Triple Pack

SKU CH-X3FW-YRPD5

Three white 120 mm reverse-blade fans with infinity-mirror lighting, daisy-chain wiring and hydraulic bearings deliver 68 CFM at under 32 dB(A)

  • Fan Counts3 Fans
  • TypeCase Fan
  • CompatibilityCase
  • Fan Size120mm
  • Fan Thickness25mm
  • Bearing TypeHydraulic Bearing

Color White-Reverse

  • Quiet cooling with noise under 32 dB(A)
  • Strong airflow of 68 CFM per fan
  • Hydraulic bearing for long-life operation
  • Daisy-chain design cuts cable clutter
  • Infinity mirror ARGB lighting on each fan

Three-Pack ARGB Case Fans

The Jungle Leopard Interstellar V2 triple pack supplies three 120 mm case fans with reverse-blade geometry and infinity-mirror lighting. Each unit uses a hydraulic bearing and a 4-pin PWM connector for speed control between 900 and 1850 RPM. The bundle includes a controller so all three fans can be managed from a single header.

Daisy-Chain Installation Limits

A slide-in pin-to-pin interlock lets the fans connect in series, so only one cable runs from the cluster to the controller or motherboard. This reduces cable clutter but means every fan in the chain shares the same PWM signal and ARGB address. Builders who need independent speed curves or per-fan lighting zones cannot separate them without breaking the chain.

Hydraulic Bearing and Mounting Impact

Hydraulic bearings keep operating noise below 32 dB(A) while delivering 68 CFM airflow and 2.4 mmH₂O static pressure. Eight vibration-damping pads on the frame corners absorb resonance against the chassis or a 360 mm radiator. Nylon-mesh sleeving on the leads resists abrasion during routing, and the 25 mm thickness fits standard 120 mm mounting holes without clearance surprises.

Přednosti

  • Quiet cooling with noise under 32 dB(A)
  • Strong airflow of 68 CFM per fan
  • Hydraulic bearing for long-life operation
  • Daisy-chain design cuts cable clutter
  • Infinity mirror ARGB lighting on each fan

Specifikace

BrandJungle Leopard
SeriesInterstellar
ModelInterstellar V2
Part NumberInterstellar V2
Fan Counts3 Fans
TypeCase Fan
CompatibilityCase
Fan Size120mm
Fan Thickness25mm
Bearing TypeHydraulic Bearing
RPM900-1850RPM
Air Flow68CFM
Air Pressure2.4mmH20
Noise Level<32dB(A)
Power Connector4 Pin
ColorBlack
Dimensions120×120×25mm 4.72*4.72*0.98in

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Should I pick the three-fan pack or look for a single fan?

The triple pack contains three 120 mm fans and a controller, letting you fill a 360 mm radiator or three case mounts with one purchase.

What does 68 CFM actually deliver inside my build?

Each fan moves up to 68 CFM at 1850 RPM with 2.4 mmH₂O pressure, enough for a 360 mm AIO or high-airflow case cooling while staying below 32 dB(A).

How does the daisy-chain ARGB and PWM wiring work?

Fans interlock via slide-in pin-to-pin connectors so a single 4-pin PWM cable and one ARGB lead run the whole cluster, reducing cable clutter.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.