Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Two black DDR4 sticks with low-profile heat spreaders

Kingston Technology Corp.

Kingston Technology Corp. KF436C18BBK2/64 FURY Beast 64GB (2 x 32GB) DDR4 3600 CL18 desktop RAM

SKU CH-XAH3-C7J2E MPN KF436C18BBK2/64

Dual-channel 64 GB kit (2 × 32 GB) DDR4 3600 CL18 with Intel XMP 2.0 profile, 1.35 V operation and black heat spreaders

  • Capacity64GB (2 x 32GB)
  • SpeedDDR4 3600 (PC4 28800)
  • CAS LatencyCL18
  • Timing18-22-22
  • Voltage1.35V
  • ECCNo

Capacity 64GB (2 x 32GB)

Speed DDR4 3600 (PC4 28800)

Latency · Color · LED · Fan · Option CL18 · Black · None

  • 64 GB total capacity for demanding workloads
  • 3600 MHz DDR4 speed with CL18 latency
  • Dual-channel kit of two 32 GB modules
  • Intel XMP 2.0 profile for automatic overclocking
  • Low 1.35 V voltage reduces power draw

64GB Dual-Channel DDR4 Kit

This Kingston FURY Beast kit provides 64GB of desktop memory across two 32GB modules. It runs at DDR4 3600 with a CL18 latency and 18-22-22 timings. The kit operates at 1.35V and includes Intel XMP 2.0 profiles for automatic configuration. Black heat spreaders cover both unbuffered DIMMs.

Suits High-Capacity Builds Not ECC Systems

Builders needing 64GB for content creation, virtualization or heavy multitasking will match this dual-channel kit to compatible AMD and Intel platforms. Systems requiring error-correcting code memory or registered modules must select a different product line. The 1.35V voltage aligns with standard desktop DDR4 requirements.

DDR4 3600 CL18 18-22-22 Timing

The 18-22-22 timing at DDR4 3600 (PC4 28800) is the primary specification that determines compatibility and performance potential. Verify that your motherboard and CPU memory controller support this speed and latency combination before purchase. Intel XMP 2.0 simplifies achieving the rated 3600 frequency.

Přednosti

  • 64 GB total capacity for demanding workloads
  • 3600 MHz DDR4 speed with CL18 latency
  • Dual-channel kit of two 32 GB modules
  • Intel XMP 2.0 profile for automatic overclocking
  • Low 1.35 V voltage reduces power draw

Specifikace

BrandKingston
SeriesFURY Beast
ModelKF436C18BBK2/64
Part NumberKF436C18BBK2/64
Capacity64GB (2 x 32GB)
SpeedDDR4 3600 (PC4 28800)
CAS LatencyCL18
Timing18-22-22
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered / Unregistered
Multi-channel KitDual Channel Kit
BIOS/Performance ProfileIntel XMP 2.0
ColorBlack
Heat SpreaderYes
FeaturesKingston FURY KF436C18BBK2/64 is a kit of two 4G x 64-bit
(32GB) DDR4-3600 CL18 SDRAM (Synchronous DRAM) 2Rx8,
memory module, based on sixteen 2G x 8-bit FBGA components per
module. Each module kit supports Intel® Extreme Memory
Profiles (Intel® XMP) 2.0. Total kit capacity is 64GB. Each
module has been tested to run at DDR4-3600 at a low latency timing
of 18-22-22 at 1.35V
Recommend UseAMD & Intel Compatible
LED ColorNone
Přepravní hmotnost0.11 kg
Rozměry balení146 × 89 × 13 mm

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What motherboard slot type and DDR generation must my board provide for this 2 x 32 GB kit to fit and function?

The modules are DDR4 DIMMs; the board needs DDR4 slots and a BIOS that can apply the Intel XMP 2.0 profile at 3600 MT/s with 1.35 V.

If I add this kit to slots that already hold slower DDR4 modules, what speed and timing will the system use?

All installed DDR4 will run at the lowest common speed and loosest timing; the 3600 CL18 modules will down-clock to match the slower sticks.

After enabling the XMP 2.0 profile in BIOS, how can I confirm the kit is running at its rated 3600 MT/s CL18?

Check the memory tab in CPU-Z or the BIOS memory-info screen; both should show 3600 MT/s with timings 18-22-22 at 1.35 V.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.