Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black braided cable with M.2 male plug on left and straight U.2 female port, 50cm length

LetLinkSo

LetLinkSo PCIe 4.0 M.2 to U.2 Adapter Left Exit 50cm

SKU CH-M2ZR-D8200

Connects a U.2 NVMe SSD to an M.2 2280 slot with PCIe 4.0 speeds up to 64 Gbps, left exit design, 50cm cable and 15-pin SATA power connector

  • ColorBlack
  • Cable Length1.6ft (50cm)
  • SpecificationsPCIe 4.0 M.2 to U.2 Adapter Left Exit
  • Connector AMale M.2 M key 2280
  • Connector BStraight Female SFF-8639(U.2)
  • Terminal GenderMale to Male

Cable Exit Direction Left Exit

  • Add U.2 NVMe storage via M.2 2280 slot
  • PCIe 4.0 supports 64 Gbps theoretical speed
  • Works with PCIe 3.0, 2.0, 1.0 devices
  • 50 cm braided cable with left-exit design
  • 15-pin SATA power required for operation

M.2 to U.2 NVMe adapter

This PCIe 4.0 adapter connects a U.2 NVMe SSD to an M.2 2280 M key slot on a motherboard or add-in card. It targets builders who want enterprise or high-capacity U.2 drives in a desktop or workstation without a native U.2 port. The 50cm braided cable uses a left-exit M.2 connector for cleaner routing in tight chassis.

Check motherboard slot and power

Verify the board has a free M.2 2280 M key slot wired for PCIe 4.0 or earlier generations. The adapter draws drive power from a standard 15-pin SATA power connector, so a spare lead from the power supply is required. No drivers or software are needed for operation.

Upgrades from M.2-only storage

The adapter lets you move from consumer M.2 drives to U.2 SSDs that often offer higher endurance and sustained write performance. The jump is worthwhile when workloads demand the 64 Gbps PCIe 4.0 ceiling and the physical U.2 form factor fits the build. It does not suit systems lacking an M.2 M key slot or a SATA power lead.

Přednosti

  • Add U.2 NVMe storage via M.2 2280 slot
  • PCIe 4.0 supports 64 Gbps theoretical speed
  • Works with PCIe 3.0, 2.0, 1.0 devices
  • 50 cm braided cable with left-exit design
  • 15-pin SATA power required for operation

Specifikace

BrandLetLinkSo
SeriesPCIe 4.0 M.2 to U.2 Adapter
ModelB0DJ8K1VZG
Part NumberB0DJ8K1VZG
ColorBlack
Cable Length1.6ft (50cm)
SpecificationsPCIe 4.0 M.2 to U.2 Adapter Left Exit
Connector AMale M.2 M key 2280
Connector BStraight Female SFF-8639(U.2)
Terminal GenderMale to Male
Cable Jakcet TypeBraided
Connector StyleM.2 to SFF-8639 U.2
FeaturesENHANCED SYSTEM PERFORMANCE
Weight1.68 ounces
Package Quantity1
Package ContentsPCIe 4.0 M.2 to U.2 Adapter Left Exit x 1

Další verze tohoto modelu

Dalších 1 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What does the box contain and is a separate power cable needed?

The package includes one PCIe 4.0 M.2 to U.2 adapter with a 50cm braided cable. A SATA power cable must be connected to the adapter for it to function.

Which PCIe generation should I select for my U.2 NVMe SSD?

The adapter runs at PCIe 4.0 speeds up to 64 Gbps and remains compatible with PCIe 3.0, 2.0 and 1.0 drives, so choose the version that matches your SSD and motherboard capabilities.

What does the 64 Gbps headline figure mean once the adapter is installed in my system?

It is the theoretical maximum bandwidth of the PCIe 4.0 x4 link between the M.2 2280 slot and the U.2 NVMe SSD; actual throughput depends on the specific drive and motherboard implementation.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.