Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green rectangular M.2 2280 circuit board with black controller and NAND chips, gold edge connector, 2.25mm thin

Lexar

Lexar NM610 PRO 2TB M.2 2280 PCIe 3.0 x4 NVMe internal SSD

SKU CH-8F3V-HPX4J

M.2 2280 NVMe SSD delivering 2100 MB/s read and 1600 MB/s write with 2TB 3D TLC storage

  • Device TypeInternal Solid State Drive (SSD)
  • Used ForConsumer
  • Form FactorM.2 2280
  • Capacity2TB
  • Memory Components3D TLC
  • InterfacePCI-Express 3.0 x4, NVMe

Options 2TB NM610 PRO

  • Sequential read up to 2100 MB/s via PCIe 3.0 x4 NVMe
  • Sequential write up to 1600 MB/s for faster file transfers
  • 3D TLC NAND with LDPC error correction for data integrity
  • 250 TBW endurance rating supports heavy workloads
  • 1,500,000-hour MTBF and 1500G shock resistance for reliability

Lexar NM610 PRO 2TB PCIe 3.0 x4 NVMe SSD

The Lexar NM610 PRO is a 2TB internal solid state drive built on 3D TLC NAND with a PCIe 3.0 x4 interface. It delivers sequential reads up to 2100 MBps and writes up to 1600 MBps. The M.2 2280 form factor fits standard laptop and desktop slots. Rated endurance is 250TB written and MTBF is 1,500,000 hours.

Check M.2 slot key and PCIe generation before

Verify the motherboard or laptop has an M-key M.2 slot that supports PCIe 3.0 x4 NVMe operation. Confirm the physical 2280 length is accepted and that the 2.25mm single-sided height clears any heatsink or chassis constraint. Ensure the system BIOS recognises NVMe 1.3 boot drives if this will be the primary OS volume.

Suits PC enthusiasts upgrading from SATA drives

This drive suits PC enthusiasts wanting 3.5x SATA speed for gaming, content libraries and heavy workloads. The 2TB capacity handles large project files and modern game installs. Users needing PCIe 4.0 or 5.0 throughput, higher TBW ratings or sustained write performance beyond 1600 MBps should look at newer generation NVMe SSDs.

Přednosti

  • Sequential read up to 2100 MB/s via PCIe 3.0 x4 NVMe
  • Sequential write up to 1600 MB/s for faster file transfers
  • 3D TLC NAND with LDPC error correction for data integrity
  • 250 TBW endurance rating supports heavy workloads
  • 1,500,000-hour MTBF and 1500G shock resistance for reliability

Specifikace

BrandLexar
SeriesNM610
ModelLNM610-500RBNA
Device TypeInternal Solid State Drive (SSD)
Used ForConsumer
Form FactorM.2 2280
Capacity2TB
Memory Components3D TLC
InterfacePCI-Express 3.0 x4, NVMe
Max Sequential ReadUp to 2100 MBps
Max Sequential WriteUp to 1600 MBps
4KB Random ReadUp to 188,000 IOPS
4KB Random WriteUp to 156,000 IOPS
MTBF1,500,000 hours
FeaturesTBW: 250TB
High-speed PCIe Gen3 x4 interface: 2100 MB/s read and 1600 MB/s write - NVMe 1.3 supported
M.2 2280 form factor
Get 3.5x the speed of a SATA-based SSD
Ideal for PC enthusiasts
3D NAND
Features LDPC (Low-Density Parity Check)
Shock and vibration resistant with no moving parts
Operating Temperature0°C ~ +70°C
Storage Temperature-40°C ~ +85°C
Max Shock Resistance1500G, duration 0.5 ms, Half Sine Wave
Max Vibration Resistance10~2000 Hz, 1.5mm, 20G, 1 Oct/min, 30 min/axis (X, Y, Z)
Height2.25mm
Width22.00mm
Depth80.00mm
Weight9.00g

Další verze tohoto modelu

Dalších 2 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Does the Lexar NM610 PRO 2TB include a heatsink or mounting screw, or must I buy them separately?

The drive is a bare M.2 2280 module weighing 9.00g with a 2.25mm height; no heatsink or screw is mentioned in the specifications.

Should I choose this 2TB model or a smaller capacity for my PCIe 3.0 x4 slot?

The 2TB version delivers up to 2100 MBps read, 1600 MBps write, 188,000 IOPS random read and 156,000 IOPS random write with 250TB TBW; lower capacities may have different figures.

What does the 2100 MBps sequential read figure mean once the SSD is installed in my PC?

It is the maximum sequential read speed over the PCIe 3.0 x4 NVMe 1.3 interface; real-world throughput depends on workload, controller, thermal conditions and system configuration.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.