Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black rectangular ATX power supply with 140mm fan and modular cable sockets

Lian Li

Lian Li SX1000P.B 1000W Platinum ATX 3.1 PCIe 5.1 power supply

SKU CH-AH50-6S8ST MPN SX1000P.B

A compact 1000 W ATX 3.1 Platinum unit with PCIe 5.1 support, 12V-2x6 cable, 140 mm fan, fanless mode to 40 % load and fully modular braided cables

  • TypeATX
  • Maximum Power1000 W
  • PFCActive PFC, PF > 0.95 under full load @ 115Vac, 60Hz
  • PSU Noise Level39.9 dB
  • Input Frequency Range100-240Vac
  • MTBF100,000 hrs minimum 25℃/75% Load

Options 1000W Black

  • 80 PLUS Platinum efficiency reaches up to 94% at 50% load
  • Fanless operation up to 40% load keeps the system quiet
  • Fully modular braided cables simplify cable management and airflow
  • ATX 3.1 and PCIe 5.1 compliance supports modern GPUs
  • 100% Japanese 105°C capacitors ensure long-term reliability

Platinum ATX 3.1 Power Supply

The Lian Li SX1000P.B is a 1000 W fully modular ATX unit certified to 80 Plus Platinum and compliant with ATX 3.1 and PCIe 5.1 standards. It uses 100% Japanese 105 °C capacitors and includes a 12V-2x6 cable with high-current copper alloy terminals. The compact 150 mm depth fits smaller chassis while delivering platinum efficiency.

Ideal For High-End Single-GPU Builds

This unit suits builders who need platinum efficiency, ATX 3.1 compliance and a native 12V-2x6 connector for a modern graphics card in a space-constrained case. It is less suited for systems requiring multiple 12V-2x6 connections or for users who prefer a larger PSU with higher wattage headroom.

Sustained Load Behaviour

At 50 % load the unit reaches up to 94 % conversion efficiency, reducing heat and AC losses during extended sessions. The 140 mm fan remains off up to 40 % load for silent operation, then ramps to a measured 39.9 dB under heavier demand. Active PFC maintains a power factor above 0.95 at 115 Vac, 60 Hz, and MTBF is rated at 100,000 hours at 25 °C and 75 % load.

Přednosti

  • 80 PLUS Platinum efficiency reaches up to 94% at 50% load
  • Fanless operation up to 40% load keeps the system quiet
  • Fully modular braided cables simplify cable management and airflow
  • ATX 3.1 and PCIe 5.1 compliance supports modern GPUs
  • 100% Japanese 105°C capacitors ensure long-term reliability

Specifikace

BrandLIAN LI
TypeATX
Maximum Power1000 W
PFCActive PFC, PF > 0.95 under full load @ 115Vac, 60Hz
PSU Noise Level39.9 dB
Input Frequency Range100-240Vac
MTBF100,000 hrs minimum 25℃/75% Load
Dimensions150mm(W)x86mm(H)x140mm(D)
Přepravní hmotnost3.18 kg
Rozměry balení152 × 140 × 89 mm

Další verze tohoto modelu

Dalších 3 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What motherboard power connectors does the SX1000P.B require to deliver its 1000 W?

The unit supplies standard ATX 24-pin, 12V-2x6 and 8-pin EPS cables; your motherboard must provide matching 24-pin and EPS sockets.

Will the 12V-2x6 cable work with my existing PCIe 8-pin graphics card?

Yes, the PSU includes 6+2 pin PCIe cables that plug directly into 8-pin GPU sockets while the 12V-2x6 connector serves newer PCIe 5.1 cards.

How can I confirm the fanless mode is active below 40 % load?

With the rear smart-stop switch enabled, the 140 mm fan stays off until system draw exceeds 40 % of 1000 W, giving audible confirmation.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.