LONGER
LONGER RAY5 10W Laser Engraver REFURBI 15.7in 400x400mm
A 10W laser engraver with a compressed 0.06mm spot that cuts 20mm wood and 30mm acrylic across a 400x400mm bed at up to 10000mm/min, controlled via Wi-Fi, USB, app or TF card for offline use
Option RAY5 10W used-2
- RAY5 10W used-2
- ray5 20w used-2
- 10 W compressed spot cuts 20 mm wood and 30 mm acrylic
- 06 mm ultra-fine spot delivers precise detail on metal, glass and wood
- 400 × 400 mm work area fits large DIY projects
- Wi-Fi, USB, app and TF card enable offline operation anywhere
- One computer controls multiple engravers for parallel production
10W Laser Engraver for Makers
The LONGER RAY5 10W is a desktop laser engraver designed for hobbyists and small workshops. It handles engraving and cutting on wood, acrylic, glass and metal. The 400 x 400 mm work area suits medium-sized projects. Buyers needing larger bed dimensions or higher continuous power should look elsewhere.
Setup and Common Issues
Data transfers via Wi-Fi, USB cable, TF card or app, enabling offline operation without a permanent computer link. One computer can command several units in parallel. The compressed-spot optics demand precise focus; misalignment quickly degrades cut quality on thicker stock.
Capacity and Limits
The 10 W compressed spot measures 0.06 x 0.06 mm, delivering fine detail at speeds up to 10000 mm/min. It cuts 20 mm wood and 30 mm acrylic in a single pass. Thicker materials or production-volume throughput exceed the practical capacity of this 15.7 in frame.
Přednosti
- 10 W compressed spot cuts 20 mm wood and 30 mm acrylic
- 06 mm ultra-fine spot delivers precise detail on metal, glass and wood
- 400 × 400 mm work area fits large DIY projects
- Wi-Fi, USB, app and TF card enable offline operation anywhere
- One computer controls multiple engravers for parallel production
Specifikace
Pro tento produkt zatím nejsou zveřejněny žádné specifikace.
Další verze tohoto modelu
Dalších 1 v této řadě
Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.
Otázky k tomuto produktu
How do I verify the laser is producing the specified spot size after assembly?
Check that the engraved lines measure 0.06 by 0.06 mm using a calibrated microscope or precision gauge on a test pattern.
What items come in the package and what must I source separately?
The box includes the 10W laser module, frame for 400 x 400 mm area, Wi-Fi, USB cable, TF card slot and app access; you must supply a computer or phone, safety glasses, ventilation and the wood, acrylic, metal or glass blanks you plan to cut.
Which version should I choose for cutting 20 mm wood and 30 mm acrylic?
The single 10W model listed cuts 0.8 in wood and 1.2 in acrylic at up to 10000 mm/min, matching those thickness targets.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
