Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Silver 3.5 inch bare hard drive with green circuit board visible

Maxtor

Maxtor 7L250S0 250GB 7200 RPM 16MB SATA 1.5Gb/s 3.5" internal hard drive

SKU CH-W1QC-BGVG4 MPN 7L250S0

250 GB desktop hard drive with 7200 RPM, 16 MB cache and SATA 1.5 Gb/s interface

  • PackagingBare Drive
  • InterfaceSATA 1.5Gb/s
  • Capacity250GB
  • RPM7200 RPM
  • Cache16MB
  • Average Seek Time9ms
  • 250 GB capacity stores large media libraries
  • 7200 RPM spindle speed delivers fast sequential access
  • 16 MB cache buffers frequent read requests
  • SATA 1.5 Gb/s interface connects to standard desktop ports
  • 9 ms average seek time reduces data retrieval delay

Maxtor MaXLine III 250GB 3.5" SATA Drive

This Maxtor MaXLine III drive is a 250GB 3.5-inch internal hard disk designed for desktop computers. It spins at 7200 RPM with a 16MB cache and connects via a SATA 1.5Gb/s interface. The bare drive is RoHS compliant and rated for 12.5 rad/sec rotational vibration.

Suits legacy desktop builds.

This drive suits builders repairing or upgrading older desktop systems that require a SATA 1.5Gb/s 3.5-inch drive. It is not for users who need more storage capacity than 250GB or who require the faster transfer rates of later SATA revisions.

SATA 1.5Gb/s interface decides compatibility

The single specification that decides fit is the SATA 1.5Gb/s interface. Your motherboard or controller must support this first-generation SATA link. The drive also requires a standard 3.5-inch bay and a SATA power connector.

Přednosti

  • 250 GB capacity stores large media libraries
  • 7200 RPM spindle speed delivers fast sequential access
  • 16 MB cache buffers frequent read requests
  • SATA 1.5 Gb/s interface connects to standard desktop ports
  • 9 ms average seek time reduces data retrieval delay

Specifikace

BrandMaxtor
SeriesMaXLine III
Model7L250S0
PackagingBare Drive
InterfaceSATA 1.5Gb/s
Capacity250GB
RPM7200 RPM
Cache16MB
Average Seek Time9ms
Average Latency4.17ms
FeaturesRoHS Compliant (Restriction of Hazardous Substances)
Native command queuing for 2X improved random read performance over previous generation MaXLine
12.5 rad/sec rotational vibration
Form Factor3.5"
Přepravní hmotnost0.57 kg
Rozměry balení203 × 152 × 51 mm

Otázky k tomuto produktu

Which version of the Maxtor MaXLine III 250GB drive should I pick?

The 7L250S0 is the single model offered here — 250GB capacity, 7200 RPM, 16MB cache, SATA 1.5Gb/s interface, 3.5-inch form factor, bare-drive packaging.

What does the 7200 RPM rating mean once the drive is installed?

The spindle spins at 7200 revolutions per minute, giving an average latency of 4.17ms and an average seek time of 9ms for typical desktop workloads.

What does the SATA 1.5Gb/s interface limit in practice?

The 1.5Gb/s link sets the maximum data-transfer rate between the drive and the host controller; native command queuing improves random read performance within that ceiling.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.