Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Seven inch IPS display with capacitive touch, HDMI and USB connections, Rev 4.1

MCDODO

MCDODO 7inch HDMI LCD IPS Capacitive Touch Screen 1024×600 Rev 4.1

SKU CH-793D-PJG78

A 7-inch IPS touch display with 1024×600 resolution and HDMI input for Raspberry Pi and desktop use

  • TypeSingle Board Computers
  • IPS panel gives wide viewing angles and accurate colour at 1024×600
  • Capacitive touch supports five-point input on Windows 10, 8.1, 8 and 7
  • HDMI for video and USB for touch works with Raspberry Pi 5, 4B, 3B+, 3B, Zero W, Zero 2W, Pico, Pico W, Pico 2, Pico 2W and Jetson Nano
  • Backlight can be switched off to reduce power draw
  • Rev 4.1 hardware update improves stability when config.txt is set correctly

7-inch IPS touch display

This 7-inch IPS capacitive touch screen delivers a 1024×600 hardware resolution over HDMI. It targets makers and developers who need a compact, driver-free monitor for Raspberry Pi boards, Jetson Nano or standard Windows desktops.

HDMI plus USB touch interface

The display uses HDMI for video and a separate USB link for five-point touch input, so no extra drivers are required on Raspbian, Ubuntu, Kali, Retropie, Windows 10 IoT or Windows 10/8.1/8/7. A backlight-off function reduces power draw when the panel is idle.

1024×600 resolution headroom

The panel comfortably handles desktop shells, media playback and touch-driven kiosk interfaces at its native resolution. It runs out of space for dense code editors, multi-window workflows or high-detail graphics that demand more pixels than the 1024×600 grid provides.

Přednosti

  • IPS panel gives wide viewing angles and accurate colour at 1024×600
  • Capacitive touch supports five-point input on Windows 10, 8.1, 8 and 7
  • HDMI for video and USB for touch works with Raspberry Pi 5, 4B, 3B+, 3B, Zero W, Zero 2W, Pico, Pico W, Pico 2, Pico 2W and Jetson Nano
  • Backlight can be switched off to reduce power draw
  • Rev 4.1 hardware update improves stability when config.txt is set correctly

Specifikace

TypeSingle Board Computers

Otázky k tomuto produktu

Does the 1024×600 IPS panel or its capacitive touch layer need any periodic maintenance or replacement?

The screen has no user-serviceable parts; the backlight can be turned off to reduce wear, but no scheduled maintenance or replacement interval is specified for the panel or touch layer.

What is the first limit reached when the display runs continuously at 1024×600 over HDMI?

Continuous operation without adding hdmi_drive=1 to config.txt can cause abnormal states and possible permanent damage, so the configuration step is the practical limit.

How much heat or noise does the 7inch Rev 4.1 monitor produce when powered all day via USB for touch and HDMI for video?

The unit is fanless and silent; heat is limited to the backlight, which can be switched off to lower power draw and temperature during extended use.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.