Micron
Micron 7450 Pro 960GB M.2 2280 NVMe MTFDKBA960TFR-1BC1ZA
Enterprise M.2 2280 SSD with 960GB capacity, PCIe 4.0 x4 interface, up to 5000 MBps read, 1400 MBps write, 520000 random read IOPS, 82000 random write IOPS, 1 DWPD endurance and 2000000-hour MTBF
- Form FactorM.2 2280
- Capacity960GB
- Memory Components3D NAND TLC
- InterfacePCI-Express 4.0 x4
- Max Sequential ReadUp to 5000 MBps
- Max Sequential WriteUp to 1400 MBps
- 960 GB capacity for enterprise workloads
- PCIe 4.0 x4 interface enables 5000 MB/s sequential read
- 520,000 IOPS random read accelerates database queries
- 1 DWPD endurance rating supports mixed-use deployments
- 2,000,000 hour MTBF ensures long-term reliability
Micron 7450 Pro 960GB Enterprise SSD
The Micron 7450 Pro is a 960GB enterprise SSD built on 3D NAND TLC technology. It uses an M.2 2280 form factor and connects through a PCI-Express 4.0 x4 interface. The drive is rated for 1 DWPD endurance with a 2,000,000 hour MTBF. It operates reliably between 0°C and 70°C.
Suits write-light server workloads
This drive suits read-intensive server tasks such as boot, logging or caching where sequential reads reach 5000 MBps and random reads hit 520,000 IOPS. The 1400 MBps sequential write and 82,000 IOPS random write make it a poor fit for write-heavy databases or high-throughput logging. Buyers needing higher write endurance should consider drives with a greater DWPD rating.
1 DWPD endurance rating
The single specification that decides fit is the 1 drive writes per day endurance rating. It defines how much data can be written daily over the warranty period without exceeding the drive's rated lifespan. Match this figure to your workload's daily write volume to confirm the drive will last in your deployment.
Přednosti
- 960 GB capacity for enterprise workloads
- PCIe 4.0 x4 interface enables 5000 MB/s sequential read
- 520,000 IOPS random read accelerates database queries
- 1 DWPD endurance rating supports mixed-use deployments
- 2,000,000 hour MTBF ensures long-term reliability
Specifikace
| Brand | Micron |
|---|---|
| Series | 7450 Pro |
| Model | MTFDKBA960TFR-1BC1ZABYYR |
| Form Factor | M.2 2280 |
| Capacity | 960GB |
| Memory Components | 3D NAND TLC |
| Interface | PCI-Express 4.0 x4 |
| Max Sequential Read | Up to 5000 MBps |
| Max Sequential Write | Up to 1400 MBps |
| 4KB Random Read | Up to 520,000 IOPS |
| 4KB Random Write | Up to 82,000 IOPS |
| Endurance | 1 DWPD |
| MTBF | 2,000,000 hours |
| Operating Temperature | 0°C ~ +70°C |
| Přepravní hmotnost | 0.91 kg |
| Rozměry balení | 25 × 25 × 25 mm |
Otázky k tomuto produktu
What throughput does the PCI-Express 4.0 x4 interface cap at for this 7450 Pro drive?
The PCI-Express 4.0 x4 interface supports up to 5000 MBps sequential read and 1400 MBps sequential write on this 960GB model.
What physical slot and screw spacing does the M.2 2280 form factor require?
It fits an M.2 key-M slot with 22 mm width and 80 mm length, using the standard 2280 mounting screw position.
How is the drive installed in a server, and which step is often missed?
Insert the drive at an angle into the key-M slot, press flat, and secure with the 2280 standoff screw; the step often missed is tightening that screw to prevent thermal-throttle lift.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
